Recording - Sharp MD-DR470H Operation Manual

Recording

MD-DR470H
[ GROUP ] [
60
18
MD-DR470H(E) TINSE0513AWZZ
1
Press the REC button.
Recording is paused.
! Even when the power is off, you can start record-
ing by pressing the REC button.
! "DISCONNECT" will appear for 1 second if noth-
[ ]
ing is connected.
2
[ REC ] To perform group record-
ing, hold down the GROUP
[ ]
button for 2 seconds or
[ MENU ]
more so that "GR" is lit.
! The unit is ready to record a new group. (To select
a group, refer to page 21.)
! When group recording is not performed, hold
down the GROUP button for 2 seconds or more so
that "GR" goes out.
! Setting for group recording will not be changed un-
]
til a new setting is entered.
3
Start playback on the external equipment
and adjust the recording level by pressing
the or
Adjust the recording level so that the maximum
sound volume from the source makes the reading
swing somewhere between -4 dB and 0 dB.
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Here you can search for the track to record.
03/3/25
button (page 20).
MD_DR470H_UK_3.fm