Error Messages - Sharp MD-DR370H Operation Manual

Error Messages

MD-DR370H
ENGLISH
ERROR MES-
SAGES





BATT EMPTY The battery has run down.





BLANK MD Nothing is recorded.
(Replace the disc with a recorded disc.)





Can't COPY You tried to record from a copy prohib-
ited MiniDisc.
(Record using the analogue cable.)





You tried to record signals other than
music (such as data).





Can't EDIT A track cannot be edited.
(Change the stop position of the track and
then edit it.)





Can't LOCK You tried to remove the MD whilst re-
cording or editing.





Can't PLAY You tried to play back a track that can-
not be played with this equipment.





Can't READ (*) The disc data cannot be read because
the disc is damaged.
(Reload the MiniDisc or replace it with an-
other one.)





Can't REC Recording cannot be performed cor-
rectly due to vibration or shock.
E-33
MD-DR370H TINSZA024AWZZ
MEANING ERROR MES-
SAGES
Can'tSTAMP
Can'tWRITE
DEFECT!
DISC FULL
Er-MD (**)
HOLD
LOCKED
NO DISC
A number or symbol appears in (*) position.
MEANING





Stamp function does not work.
(Check the number of tracks.)





Cannot save the TOC information cor-
rectly to a MiniDisc.





The disc is scratched.
(If the recorded sound is not right, retry re-
cording or replace the disc with a record-
able one.)





The disc is out of recording space.





The microprocessor has reported a
system fault and the unit is out of order.
(To have it repaired, go to the distributor
where you purchased the unit.)





The unit is in the hold mode.





You removed a MiniDisc whilst record-
ing or editing.
(Turn off the power before removing the
MiniDisc.)





A disc has not been loaded.
04/1/5 MD-DR370H_SEEG6.fm