Changing Default Settings - Sharp MD-DR370H Operation Manual

Changing Default Settings

15
Whilst in the stop mode ...
1
With a MiniDisc inserted, press the MENU/ENTER
button for 2 seconds or more. "SET UP" will ap-
pear.
When you release the button, "BEEP" will flash.
2
Press the or button to select the menu.
3
Press the MENU/ENTER button to display the set-
ting item.
4
Press the or button to select the setting
items.
5
Press the MENU/ENTER button.
MENU
BEEP (Confirmation BEEP ON*
sound)
BEEP OFF
AUTO PLAY (Auto A-PLAY ON*
play)
A-PLAY OFF
POWER SAVE (Auto AUTO Psave* Set.
power save)
Psave OFF
D-LEVEL (Digital re- D.L MODE 1*
cording level)
D.L MODE 2
(*) indicates default setting.
MD-DR370H TINSZA024AWZZ





Beep sound
You can eliminate the confirmation sound that beeps when
you press a button.





Auto play
You can make the unit not play automatically when you insert
a playback-only MiniDisc or an accidental erasure protected
MiniDisc.





Auto power save
When the unit is used in a place exposed to much vibration,
sound skipping can be decreased by cancelling the auto
power save function. (Battery will drain faster.)
What is auto power save function?
During playback, maximum 40 seconds (in stereo) of musical
information is stored. Auto power save function automatically
adjusts the storage time between 5 and 40 seconds to
reduce the power consumption. If this function is cancelled,
SETTING ITEM
the storage time cannot be adjusted.





If this unit is used with the AC adaptor, the storage time
Beep
will be 40 seconds regardless of the settings.





The storage time varies depending on the recording
Silent
mode.





Set.
Digital recording level
"D.L MODE 1"
Cancelled.
The digital recording level you set will be kept even after
cancelling recording.
"D.L MODE 2"
Cancelled.
Every time you cancel recording, the level will return to
[D.L 0dB].
Setting re-
tained.
Cancelled.
MD-DR370H
ENGLISH
E-22
04/1/5 MD-DR370H_SEEG4.fm