Monitor Data Paths; Use Performance Monitor To Monitor Hbas; View And Change Performance Monitor Settings - HP StorageWorks 8000 - NAS Installation And User Manual

Monitor Data Paths

Check path configuration and performance using several methods.
These topics are discussed in detail below.

Use Performance Monitor to Monitor HBAs

Use HP NAS 8000 Performance Monitor to:
Note:
on what you enable. Information presented here is for HBA monitoring only. NFS and
CPU performance monitoring are discussed in the HP NAS 8000 User's Guide.

View and Change Performance Monitor Settings

Performance Monitor defaults to the disabled state. Metrics are not received and
no performance history is recorded. You can enable Performance Monitor to
receive data every 5 seconds for a particular HBA, and choose whether to
maintain the performance history for an enabled HBA.
To access and enable Performance Monitor:
1. From Command View NAS menu bar, select Tools > Performance Monitor.
2. Select HBAs (not a specific HBA) from the tree in the left panel.
hp StorageWorks NAS Data Path Manager Installation and User's Guide
Use Performance Monitor to Monitor HBAs
View Volume Groups for Path Information
View and Change Performance Monitor
Observe Data Path Performance.
Performance Monitor can show HBA, NFS, and CPU performance, depending
This opens a new window.
shows the Performance Monitor window and a sample tree.)
NAS Data Path Manager
Settings.
(Figure 3
17