To Install Battery Pack; To Remove Battery Pack; Turning The Radio On/Off; Controlling Volume - Craftsman 315.101260 Operator's Manual

19.2 volt radio
Hide thumbs Also See for 315.101260:
Table of Contents

Advertisement

TO INSTALL
BATTERY
PACK
See Figure 3.
Place the battery pack on the radio.
Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured on the
radio before beginning operation.
TURNING
THE RADIO
ON/OFF
See Figure 4.
To turn ON: turn the ON/OFF/VOLUME
knob clockwise.
To turn OFF: turn the ON/OFF/VOLUME
knob counter-
clockwise to the OFF position.
BATTERY
PACK
,_
LATCHES
DEPRESS LATCHES TO
RELEASE BATTERY PACK
TO REMOVE
BATTERY
PACK
See Figures 3 - 4.
Place the power switch in the OFF (O} position.
Locate latches on side of battery pack and depress
both sides to release battery pack.
Remove battery pack from the radio.
Fig. 3
MODE
BUTTON
ON/OFF
VOLUME KNOB
TUNE/SEEK
SELECTOR
Fig. 4
RADIO
MODES
See Figure 4.
There are four mode settings on the radio: FM, AM, AUX,
and the Weather Band setting. To select any of these
settings, turn the radio ON and push the MODE button to
the desired setting.
CONTROLLING
VOLUME
See Figure 4.
Use the volume level indicator located on the
ON/OFF/VOLUME
knob to find the desired volume.
• Turn the ON/OFF/VOLUME
knob clockwise to increase
radio volume.
• Turn the ON/OFF/VOLUME
knob counterclockwise
to
decrease radio volume.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents