JVC RX-DV31SL Instructions Manual

Home theater dvd-audio/video receiver

Hide thumbs Also See for RX-DV31SL:

Instructions manual (149 pages)

Service manual (66 pages)

Instructions manual (78 pages)

Table of Contents

Quick Links

Download this manual See also: Service Manual, Instruction Manual

JVC

HOME THEATER DVD-AUDIONIDEO

RECEIVER

RX-DV31St

AI/f_I'_UD/I

I IA//f

AUD=OIVmEO

DIGITAL

SURROUND

3©©©

©©©©

3©©©

000

_ czJcz_ cz_

INSTRUCTIONS

For Customer Use:

Enter below the Model No. and Serial

No. which are located either on the rear,

bottom or side of the cabinet, Retain this

information

for future reference.

Model No.

SeriaI No.

LVT1001-001A

[J]

Table of Contents

Summary of Contents for JVC RX-DV31SL

Page 1 HOME THEATER DVD-AUDIONIDEO RECEIVER RX-DV31St AI/f_I'_UD/I I IA//f DIGITAL DIGITAL SURROUND AUD=OIVmEO 3©©© ©©©© 3©©© _ czJcz_ cz_ INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet, Retain this information for future reference.
Page 2: Warnings, Cautions, And Others
Warnings, Cautions, and Others CAUTION To reduce the risk of electrical shocks, fire, etc.: Do not remove screws, covers or cabinet. Do not expose this appliance to rain or moisture. Caution id)/I STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The IO/I STANDBY/ON button in any position does not disconnect the mains line.
Page 3 For U.S.A This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate...
Page 4: General Precautions
Check to be sure you have all of the following supplied General Precautions accessories. The number in the parentheses indicates the quantity of the • DQ NOT insert any metal object into the unit. pieces supplied. • DQ NOT disassemble the unit or remove screws, covers, or cabinet.
Page 5 ........AV COMPU LINK Remote Control System ..81 • Digital input (DIGITAL IN) terminals ......• Auto surround ............Operating JVC's Audio/Video Components ,,, 83 • Video output mode ..........Operating Audio Components ........63 Sound Adjustments ........Operating Video Components ........64 •...
Page 6 See pages in the parentheses for details. /9:1 INPUTANALOG/DIGITAL button (14) INPUT ATT. (attenuator) button (15) if] O/I STANDBY/ON button and STANDBY lamp (12) /f0] SURROUND ON/OFF button (30) /HI SURROUND MODE button (30) 1:2] Disc tray and illumination lamp (17) 13LSource selecting buttons (12) REC (recording) MODE button (16)
Page 7 See pages in the parentheses for details. /il OPEN/CLOSE button (17) _/ TV/VIDEO button (17, 64, 65) I_3ME_R DVD-AU DIO/VIDEORECEIVER /3 Source selecting buttons (12) * DVD, VCR, DBS, TV, FM/AM, TAPE, CDR /4] TV VOL (volume) +_ button (64, 65) /_) CHANNEL +_ button (64 Multi operation buttons * TUNING _...
Page 8 (6_ PAGE button (41) Remote control--inside the cover (7_ PROGRESSIVE button (16) (8) VFP button (43) C9_Sound adjustment buttons (27, 31,63) ,, BASS + and buttons * TREBLE + and buttons ', TEST button ', EFFECT button * SUBWFR (subwoofer) + and buttons ', CENTER + and buttons...
Page 9 If AM reception is poor, connect an outdoor AM loop antenna single vinyFoovered wire If FM reception is poor, connect (supplied) (not supplied). outdoor FM antenna (not supplied). FM antenna (supplied) Snap the tabs on the loop into the slots of the base ANTENNA to assemble the AM loop _nna,...
Page 10 You can connect following speakers to this unit: • two pairs of front speakers CAUTIONS: FRONT SPEAKERS 1 terminals FRONT SPEAKERS 2 terminals • Use speakers with the SPEAKER IMPEDANCE indicated by • a pair of surround speakers the speaker terminals. •...
Page 11 • Illustrations of the input/output terminals below are typical examples. When you connect other components, refer also to their manuals since the terminal names actually printed on their rear vary among the components. • About connecting cords For video connections Notes for video connection The S-video cords and the component video cord are not...
Page 12 Getting Started • Illustrations of the input/output terminals below are typical examples. When you connect other components, refer also to their manuals since the terminal names actually printed on their rear vary among the components. • TV connection DO NOT use a TV through a VCR or a TV with a built-in VCR; Otherwise, the picture may be distorted. Connect using one of the video terminals.
Page 13 • VCR connection Connect using one of the video terminals. _m_m_m _r,e •,D= / ,,,_= White White White • Cassette deck/CD recorder connection Cassette deck White White...
Page 14 Getting Started • Digital connection You can connect either of plug, CD recorder DIGITAL OUT terminal for digital recording. Now, you can plug the power cord of the unit into the AC outlet. Notes: CAUTIONS: • Keep the power cord away from the connecting cords and the •...
Page 15: Front Panel
No_s: • When you have connected some digital components using the digital terminals (see page 11), register the digital input terminal Press 0/I STANDBY/ON on the front panel or setting (see "Digital input (DIGITAL IN) terminals" on page 25) and doll AUDIO on the remote control.
Page 16: Rear Panel
Basic OpePations To use both pairs of the speakers • Listening with headphones Press SPEAKERS 1 and 2 so that the SPK 1 and 2 indicators Connect a pair of headphones to the O (phones) jack on the light up on the display. front panel.
Page 17: Digital Connection
To check or change the remaining time until the shut-off time Press SLEEP once. From the remote control ONLY MUTING • The remaining time (in minutes) until the shut-off time appears. Press MUTING to mute the sound. To change the shut-off time Press SLEEP repeatedly.
Page 18 Basic OpePations DGTL AUTO Select for the digital input mode. DGTL D.D. Select for playing back software The DIGITAL AUTO indicator lights up. encoded with Dolby Digital. The unit automatically detects the The r]rlulerrAL indicator lights up*. incoming signal format, then the sound DGTL DTS Select for playing back software signal indicator for the detected signal...
Page 19 "INTERLACE." To check the see page 56. compatibility of your TV, contact your deale_ All JVC progressive TVs and High-Definition TVs are fully • The choice menu (see page 51 ) and on-screen bar (see compatible with this system, page 34) are always recorded when they appear on the TV.
Page 20: Dvd Audio
(refer to the manual supplied with your TV). . When you use a JVC's TV, you can turn on your TV by To activate and select Surround mode, see page 30. pressing TV VII on the remote control and select the video input by pressing TV/VIDEO.
Page 21 To stop playback To locate the beginning of the chapter or track Press m. Press _ or P*,_. The unit memorizes the point where you stop playback and Press _ (or _,_) to locate the beginning of the next (current the RESUME indicator lights up on the display (except when or previous) chapter or track.
Page 22 On the front oanel Once a station is assigned to a channel number, the station can be tuned in quickly. You can preset up to 30 FM and 15 AM stations. Press FM/AM to select the band. The last received station of the selected band is tuned in. •...
Page 23: Auto Muting
From the remote control After tuning in to the station you want to store, When an FM stereo broadcast is hard to receive or noisy, you 1 Press MEMORY. can change the FM reception mode while receiving an FM The channel number position flashes on the display for broadcast.
Page 24 Press CONTROL _ (or <) to select an Some of the following settings are required after connecting appropriate number of the connected and positioning your speakers while others will make operations easier. speakers. ,, Each time you press the button, the indication changes •...
Page 25 setting. Press MEMORY to finish • When you select "LARGE" as the room size "SETUP END" appears on the display for a while, then Front 10 ft goes back to the source indication. (L, R) (3.0 m) • Speaker configuration settings now become active.
Page 26: Basic Settings
Basic Settings • Operating procedure • For front speakers--"FRNT SP" Ex.: When setting the digital input (DIGITAL IN) terminals. _c_zAuyo sPKt i,,,= I ,,i,, ,,,. i,,,, i,='= ,,,,, Before you start, remember... i" i":: . r'.ii ::::, i"' ;; L K i.::i _ ,J_c There is a time limit in doing the following steps.
Page 27 The distance from your listening point to the speakers is Select one of the following settings: another important element to obtain the best possible 80Hz Select when the cone speaker unit built in the surround sound from the Surround modes. speaker is about 12 cm (4 3/+inches).
Page 28: Changing The Source Name
Basic Settings Notes: • Digital input (DIGITAL IN) terminals • This function does not take effect in the following cases: "DGT" - While playing an analog source. - While selecting "DGTL L2D," or "DGTL DTS"as the fixed digital L_G1yAL_0 SP_I input mode (see page 15).
Page 29 You can make sound adjustments to your preference after • Operating procedure completing basic setting. Ex.:When setting the front speaker output balance. Before you start, remember... Adjustment items: There is a time limit in doing the following steps. ,* Front speaker output balance '_ If the setting is canceled before you finish, start from step ! ,, Tone_ again.
Page 30 • Tone • Subwoofer audio position • For bass sound--"BASS" "AUDIO POS (position)" L_G1yAL_O SP_I _PKI [] ....• = ....! i i ! i ": i ! i i,,,: i ! :,,, i,'i i' ;i' '- i::-o i!;...
Page 31 DTS Digital Surround** You can use the following Surround modes to reproduce realistic sound field: Used to reproduce multi_channel sound tracks of software • Dolby surround encoded with DTS Digital Surround (_). • Dolby Pro Logic II • To use software encoded with DTS Digital Surround, •...
Page 32 Creating Realistic Sound Fields DAP modes can be used when the front and surround • All Channel Stereo speakers are connected to this unit (without respect to This mode can reproduce a larger stereo sound field using all the center speaker connection: no sound comes out of the connected (and activated) speakers.
Page 33 Press SURROUND MODE. • Each time you press the button, Surround mode changes as illustrated below. When Auto Surround is set to "OFF" or 2-channel source When 5 or 4 speakers (except center speaker) are other than Dolby Surround software is played back, activate connected: Surround mode manually.
Page 34 Creating Realistic Sound Fields For using test tone 1 Press TEST. The playback sound stops during play. When playing back the source with Surround mode, you can "TEST L" starts flashing on the display and a test tone adjust the speaker output levels for Surround modes. comes out of the speakers in the following order: Once you have adjusted the Surround modes, adjustment is memorized for each source.
Page 35: Dvd Video
Note on Region Code DVD players and DVD VIDEO have their own Region Code numbers. This unit can play back only DVD VIDEO recorded Playable disc types with the color system of NTSC whose Region Code numbers include "1." This unit has been designed to play back the following discs: DVD VIDEO, DVD AUDIO, Video CD (VCD)*, Super Video CD (SVCD)*, audio CD*, CD-R, and CD_RW.
Page 36: Dvd Player
DVD Player Operations • Disc structure On a JPEG disc, each still picture is recorded as a file. Files are usually grouped into a folder. Folders can also include DVD VIDEO consists of "titles," and each title may be other folders, creating hierarchical folder layers. divided into some "chapters."...
Page 37: Basic Dvd Player Operations
Disc type This section explains advanced operations of the built-in _] Playback information DVD player by using the remote control. For MP3 playback, see pages 47 and 48, and for JPEG Indication Meanings Available discs playback, see pages 49 and 50. Mbps shows the current transfer •...
Page 38 DVD Player Operations You can change the time information in the on-screen bar and the display window on the center unit. During playback or while stopped Press ON SCREEN twice. The omscreen bar appears on the TV. 2 Press cursor I_ (or <) to move [_> to TIME. 3 Press ENTER.
Page 39 • From the VCD/SVCD menu with PBC VCD ot SVCD recorded wi:h PBC has its own menus such es a lie: of the :rac4sr (After Ioaoing such a oisc, "PBO" eppeats on :he displey.) "bu cen Iocete the specific :reck by using :he menu (see also page 33)r When the menu appears on theTV...
Page 40 Using the on-screen bor Press ON SCREEN repeatedly untl the on-screen bar with pull-down menu appears on the TV. Press cursor _ (or .,11) repeatedly to move _ in the pull-down menu, then press ENTER, T_e following pop-up wiqoow appee_s uqoer :qe pall- oown mequ, Ex,: The first view a_gle is selected Hutof 3 view angles recotoeo.
Page 41 2 Press AUDIO repeatedly to select the Using the on-screen bar desired audio language. Press ON SCREEN repeatedly until the on-screen bar • Eecn time you press t_e button, the eucio lenguege with pull-down menu appears on the TV. cnenges, Press cursor I_- (or _1) repeatedly to move [_ to in the pull-down menu, then press ENTER•...
Page 42 Press AUDIO repeatedly to select the desired audio channel. • Each time you p_ess the bJh.on, the auDiO chenqel chance_. You ten ster: playing a tide, chepter, group, or :rac< you For VCD: specify. You cen else play e Disc Pore :he specified time. Ex.: ST =>...
Page 43 • LocaHng a desired chapter/track Locating poslHon • a desired Wqen playiqg beck DVD VIDEO/DVDAUDIO, you cen search You ten ster: playiqg at your desired position by specifying for :he cqap:eri:reck qumber to be playeo. tqe elapsed pleying :ime from :he begiqqing of :he curteqt tide up to "9:59:59"...
Page 44 To pause slow*motion playback (still picture playback:) Press IIr This uqi: provides special pic:ure pleybac4 fuqctions including To rsturn to normal playback still pic:ure, frame-by-Peme, slow-motion, ano zoom. Press Borers using the remote control, press DVD so that the remote control works for the DVD player, Note: •...
Page 45 • Zooming • Playing back a bonus group Some DVD AUDIOs here a special group celleo "bonus During playback or while paused group '_ _vnose COn*_en*_s Open DuBIJCr bonus group is alweys essigqec to the las: group of e disc (for exemple, if a cisc coqteiqs 4 groups incluoing a bonus Press ZOOM.
Page 46: Tone
adjust the appearance of the picture YOUv._.n._-_, u_..qe app_._- ._.nv_of plv.ure aq_, _._._r_ iq USErH _n_ "USER2." The VFP (Video Fine Processo0 function enebles you :o edus: :he picture beseo oq tqe pic:ure tone, or personel I Press VFP, then press cursor _ (or -<) 13 reference, repeatedly to select "USER1"...
Page 47 4 Press cursor T (or A) repeatedly to change 3 Press the number buttons (1-10, +10) to the setting, then press ENTER. enter a track/group you want to program. Your aojustment is stereo enc the curren: VFP parameter EXr: _:_ select the trac4igroup number 3, press 3r lie: appeers agein.
Page 48 You e_n repe_t playb_ok of :he eu_reqt tide or cq_pte_ (fo_ DVD VIDEO), group or :rac4 (for DVD AUDIO), or :rack (for VCD]SVCD]CD). You e_n _lso repeat pl_yb_o4 of _ desired pordoq. _)" Before using the remote control, press DVD so that the remote control works for the DVD player.
Page 49 3 Press cursor v (or &) repeatedly to select Rapeoting o desired portion the repeat mode, then press ENTER. You cen repeet playbeck of e desired by specifying pot:ion • Each :ime you p_ess cursor v (or A), :he repeat mode the beginning (point A) and the ending (point B), changes es follcrws: [] During playback...
Page 50 This uqi: ten play beck MP3 files on a CD-R o_ CD-F_'V. We cell such e disc "MP3 oisc" in :his iqs:tuc:ioq. • Before using the remo:e control, press DVD :o change the remo:e conbol operedon mode for the MP3 disc operations. •...
Page 51 To start playback by specifying a group number Press TITLEiGROUR The number buttons now wo_k for c oJo _electir_n fo_ ab,.,ut o _.,on,,_. YL,U.,=n _=rcn fo an,, play .he ,,e_ e,, groups and bac<s thn _ugh the MP3 CONTROL screen sh_wn _n TV, The current group number on the displey chenges to MP3 CONTROL screen Press the number buttons (1 - 10, +10) to enter the group...
Page 52 This uni: cen play beck JPEG files on e CD-R or cD-nw. Starting sllde-show playback cell such e disc "JPEG disc" in this instruction. Loed a JPEG oisc, then press _,-. • Before using the remote control, press DVD to change •...
Page 53: Repeat All
2, Select a file. Stopping slide-show playback completely Press carso_ I_ to move the qigqlic,_t ba_ to t_e dgqt file Press i. list, then press cursor v (or A) r_l ..dly ,, ._el_,t the _._lr_d fiE. JPEG CONTROL screen appea_s -_h e •...
Page 54: Choice Menu Operations
You can adjust the ini:ial seeings through :he choice menu on • Configuration of Choice menu :he TV, The choice menu has :he following menus: Befora operating the choice menu, select lhe source you want to adjust by prassing source selecting button, LANGUAGE menu •...
Page 55: Picture Menu
5 Press cursor T (or A) repeatedly to select • Oper'ating pr'ocedure the desired option. Ex,: When setting the picture source. Befora operating the choice menu, pr_sss DVD to change the source to "DVD" Press CHOICE. The L-&NGUAGEmenu _pr-_r_ ..,',qt_teTV. Ex.: When "FILM"...
Page 56: Menu Language
Select one of the following seRings: • Language selection menuILANGUAGE 16:g NORMAL (Wide television conversion) Selec: when the aspec: retie of your TV is fixed :o 16:9 (wide TV). The unit autometically eo us:s the screen wid:h of :he output sic,hal correctly when playing bac4 e picture whose espect retie is 4:3.
Page 57 • BASS SCREENSAGER You con activate or oeactiva:e ":he screen seve_ function, Acjust me bass tone level from the from spea4ers wi:hiq the range of 10 oB to +10 oB in 2 step in:ervals, Select one of the following 8etlingg: The pic:ure on :he TV becomes da_,;...
Page 58 • LEVEL • Speaker settlng rnenu--SPK. SEll'ING Selec: :his :o enter the LEVEL submenu. SIZE CENTER SPEAKER, SURROUND LEFT Select this to on:or :he SIZE submenu. SPEAKER. SURROUND RIGHT SPEAKER. and SUB WOOFER Aojust the speeker output level wi:hin the ranc, e of 10oB to +10 oB fo_ each speeke_ in 1 step"...
Page 59: Parental Lock
CROSSOVER • ONSCREEN GUIDE Wqen you use a smell spea4er iq any posi:ion, :his unit You can ec:ivd:e ot deectivate the following on-screen eu:omaticelly reallocetes the bass souqo elemeqts c,uioe icons: essic, neo to the smell spea4er :o the lerge speekers. For mul:i-view eqcJes: To use this func:ioq properly, se: :qis crossover freeueqcy For mul:ilinc_ual sub:itles:...
Page 60 II_/'l r_[_l _ P_,_i_'_l _ I_ 4 Press cursor T (or A) repeatedly to select the country code, then press ENTER. [_ moves to "SET LEVEL," 5 Press ENTER. The pop-up" wincow for setting level appea_s, You can restdct pleybac4 of DVD VIDEO con-ainiqg violen: sceqes aqo tqose qot suitable for your family members, Nobody ceq play such e oisc unless :his function is 6 Press cursor T (or A) repeatedly to select...
Page 61 • Changing the Parental Lock setting Releasing temporarily • Parental Lock When you se: e s:ric: perental level, some discs may no: be I Press CHOICE, then press cursor I_ (or -,,I) pleyeo beck et ell. When you Ioao such e oisc eqo try s:_play to display the OTHERS menu.
Page 62 codes list for Parental Lock Country/Area Andorra Eritrea Leo _eople's Rwanda United Arab Emirates Spain Demeoratic Republic Saudi Arabia Afghanistan Ethiopia Lebanon Soloreon Islands Antigua and Barbuda Finland Saint Luda Seychelles Anguilla FIji Liechtenstein Sudan Albania Falkland Islands (Malvinss) Sri Lanka Sweden Armenia Micronesia...
Page 63: Progressive Scanning
Multi-channel Aspect ratio The retie of verticel and horizontal sizes of a cisplayeo DVD VIDEO hes been designeo to nave each sounobeck conssitute one sound field, Multi-cnennel refers to a image, The horizonselvs, verticel ratio of conventionel TVs is 4:3 eno thel of wide-screen TVs is 16:9, ssructure of sound :racks heving :hree o_ mo_echeqqels.
Page 64: Av Compu Link Remote Control System
(TV and VCR) through the unit, Tqis unit is eeuippeo with the AV COMPU LINK-Ill, whicq qas aoded e function :o operete JVC's vioeo compoqeq:s tnrougq :he vioeo COmpoqen:s terminels. To use this remote Coq:rol sys:em, you qeeo to connect the vioeo componen:s you want to operete, following :he diagrems below end :he proceoures oq page 62.
Page 65 If you have already plugged your VCR, TV, and this unit play One-teuoh into the AC outlets, unplug their AC power cords first. Simply by staqing playback on the built-in DVD pleye', you can enoy the playbec,_ wi:nout setting o:her switches Connect your VCR, TV, and this unit following manually.
Page 66: Surround On/Off
You caq operate JVC's audio eqc video eompoqeqts with this unit's remote coqtrol, siqce control sigqals for JVC's components ere preset iq the remote control. To operate JVC's audio components using this remote HQME _'iEA3_R control: DVD-AUDIO/VIDE'O RECEIVER • Aim :he remo:e control directly a: :he remo:e seqsor on tqe unit.
Page 67 AV COMPU LINK-_ acks (see pege 61) in aooition to the previous) trec_. eudio/vioeo COnnec:ion$ (see pages 9 :o 11). Skips :o tne beginning of tne qe_ bee4. • Some JVC's VORs cen eccep: two types of the conTol • S:ops playing. signals remote cooes "A"...
Page 68 The remo:e conbol supplieo with this unit can :ransmi: conbol signels for o:her mequfac:urers' TVS, DBS tuqers, end VCRs. By chengiqc, the transmittable signels from prese: oqes :o the other menufecturers' sic,qals, you can operate o:her menufacturers' componeqts using :his remote comrol. ,,_ Try to operate your TV by pressing TV dOtl.
Page 69 Manufactures' codes for DBS tuner To change the transmittable signals for operating other manufacturers' DBS tuner Manufacturer Codes Echostar €0 Press and hold DBS ®tl. Gemini Press DBS. General instrument 01 *, 41 Hamlin 03 - 06 3 Enter the manufacturer's code using the Hitachi number...
Page 70 Manufacturss' codes for VCR To change the transmittable signals operating other manufacturers' Manufacturer Codes 01 _ - 04 I Press and holdVCR 'o11. Aiwa Press VCR. Akai Bell & Howell 3 Enter the manufacturer's code using the Daewoo number buttons (1 - 9, 0).
Page 71 qi:_ge: :he best performaqce from tqe sys:em, 4eep your oiscs and mecheqism cleeq. General Notes Cleaning Discs In generel, you will qave the bee: perfo_mence by _eepiqg Wipe the disc wi:q a soft- clo:h iq e st:eight liqe from ceq:er to your 0iscs and mecheqism cleeqr •...
Page 72 Use this chert to help you solve caily operational problems. If :here is any problem you canno: solve, contact your JVC's se'viee ceqter. • General PROBLEM POSSIBLE CAUSE SOLUTION Tqe power does qo: come oq. The pov,_,er c ord is qo: plugged in.
Page 73 • For DVD Player PROBLEM POSSIBLE CAUSE SOLUTION No picture is cisplayed on tqe TV, The v ,,_,., co ,, _ n,.,. connev._d Connect t_e cord correctly (see _ae, e _ 9 _s,, correctly. 10). TV input selection is incorrect. Select t_e correct input on t_e TV, The cisc is not pleyable.
Page 74 • Fur Tuner PROBLEM POSSIBLE CAUSE SOLUTION Herd to listeq to bq:_aoces: beceuse The AM loop antenne is :oo close to Cheqge :qe position eno direcdoq of ":he AM of qoise. :he uqi:. loop an`:enne. The supplieo FM an:enne is qot Exteno tne FM en`:enna a`:`:he best position.
Page 75 Amplifier Output Power At Stereo opera:ion: Front channels: 100 W per channel, min. RMS, driven into 8 _:_, 40 Hz to 20 kHz with no more than 0.8% total harmonic distortion. At SJrroJqo operetioq; Front ehennels: 100 W per chennel, miqr RMS, driven in:o 8 _} et 1 4Hz, wi:h no mo_e :hen 0r8% total harmonic dis:ordoq.
Page 76 Period All products and parts * thereof may bc brought to a JVC authorized service center on a carry ;n bas;s except for Tclcvis;on sets having a screen -_ size 25 ;nches and above wh;ch arc covered on an in home basis.
Page 77: Service Centers
1 (800)537-5722 for your nearest authorized servicer or visit our website at www.JVC,aorn Remember to retain your Bill of Sale for Warranty Service. Do not service the television...
Page 78 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii VICTOR COMPAI'_VOF JA-'AI_ LIMITED © 2003 VICTOR COMPANY OF JAPAN, LIMITED 0303NHMMDWJEM...

JVC RX-DV31SL Instructions Manual

Quick Links

Related Manuals for JVC RX-DV31SL

Summary of Contents for JVC RX-DV31SL

Table of Contents