M/Ba-T500 Series - Epson EMBEDDED UNIT EU Owner's Manual

(EU-T412/T422
T432/T442)
Step 1 : Push the lever, Step 2 : Set the paper roll
open and pull down the
top frame until it is fully
open.
Step 3 : Put the paper in Step 4 : Return the frame
the paper guide. to its previous position.
The paper will load
automatically.
SPECIFICATIONS
EU-T412
57.5 ± 0.5mm x
Paper Dimensions
dia.203mm max
Print Method Thermal line printing
Paper Path
Straight
Print Speed
150 mm / sec.
Paper Thickness
0.06~0.15 mm
24 VDC ± 2.4 V
Power
Reliability
MCBF Mechanism : 37 x 10
5
Receipt printing
3 x 10
Printer life
Mechanism: 15 x 10
Thermal head: 100 km (62.14 miles)
Overall Dimensions 194.7 (W) x 170.6 (D)
Mass Approx. 3.9 kg (8" type)
SPECIFICATIONS
EU-T432
79.5 ± 0.5mm x
Paper Dimensions
dia.203mm max
Print Method
Thermal line printing
Paper Path
Straight
Print Speed
150 mm / sec.
Paper Thickness 0.06~0.15 mm
24 VDC ± 2.4 V
Power
Reliability
MCBF
Mechanism : 37 x 10
5
Receipt printing
3 x 10
Printer life
Mechanism: 15 x 10
Thermal head: 100 km (62.14 miles)
Overall Dimensions 194.7 (W) x 170.6 (D)
Mass Approx. 3.9 kg (8" type)
*Please contact your EPSON representative
for unit configuration.
Embedded Unit

M/BA-T500 Series

New-standard high performance thermal printer
Super-fast printout
The blazingly fast M-T500 series prints up to 150
mm (5.9 inches) per second. These printers also
deliver fast throughput even in Full-Graphic Mode
(uses BA-T500).
Flexible paper choice for various applications
These printers can easily handle thick paper and
tickets. They can also handle large diameter paper
rolls of up to 254 mm (10 inches) with an additional
feed assist mechanism.
Three types of paper path
Curved, straight and drop-in paper paths are
available.
Standard autocutter
A durable autocutter is standard equipment. Sharp
EU-T422
and reliable, the autocutter can even be used for
59.5 ± 0.5mm x
heavy paper. There are two models of autocutter
dia.203mm max
available: a full-cut model and a partial-cut (1 point
left uncut) model. A high-speed cutter is also
available.
Standard interface
RS-232 serial, IEEE 1284 bi-directional and USB 1.1
interfaces are also available in separate models for
6 direct connection to standard PCs.
lines
times
6
lines
SPECIFICATIONS
(8" type)
x 350 (H) mm
Paper Width
Paper path
*Note: Autocutter is selectable as follows; AF: full cut type, AP: partial cut type
EU-T442
See the specifications on page 17 for details.
82.5 ± 0.5mm x
dia.203mm max
OPTIONS
Connector Cable Unit
DC-T500
The DC-T500 enables the printer to use power supply unit
PS-180. By attaching the connector cable unit DC-T500, you can
use the EPSON standard power supply unit PS-180. This means that you do
6
lines
not have to design a new power supply unit for the EU and BA series by yourself.
times
6
lines
Paper Near End Sensor Unit
NE-T500
(8" type)
x 350 (H) mm
Paper Near End Sensor Available
Paper near-end sensor unit connects to the EU-T500 series and EU-T400 series and BA-T500.
Low Paper Supply Detection Function
This highly efficient microswitch informs you when the paper roll is about to run out.
RS232 / IEEE1284 Type
M-T511A* M-T512A* M-T521A* M-T522A* M-T531A* M-T532A* M-T532HF* M-T537A* M-T533A* M-T541A* M-T542A* M-T542HF*
57.5 ± 0.5 mm 59.5 ± 0.5 mm
Curve Straight Curve Straight
Curve
Embedded Unit
USB Type
PS-180 available
By attaching the optional connector cable unit DC-
T500, the printer works with the PS-180 power
supply unit.
Multi-language type ready
In addition to the to Alphanumeric standard character
set, Japanese (including Kanji), Simplified Chinese
and Traditional Chinese and Korean are available as
factory options.
DC12 V operation
DC 12 V operation is possible through a standard
power source for PC environments by using M-T505
/ BA-T505.
BA-T500 / BA-T505 SPECIFICATIONS
Supported Printer M-T500 Series
Printing Speed 150 mm / sec. max.
Printing Character Text (Euro Symbol available), Barcode, Graphics
Barcode Type
UPC-A, UPC-E, EAN 13(JAN), EAN 8(JAN), ITF,
CODE 39, CODABAR, CODE 93 and CODE 128,
Two-dimentional code: PDF417
Interface
Parallel (IEEE 1284 bidirectional),
RS-232 or USB
0 to 55 °C
Operating Temperature
Driver ®
Windows 95/98, Windows NT4.0, 2000, XP, Linax
24 VDC ± 10%
Operating voltage
Other Function
HEX dump User can use Hexadecimal dump print for debugging
Self-test Configuration printout and test pattern
Download
Flash ROM (graphics)
Option Japanese Kanji, Traditional Chinese,Simplified Chinese Character,Korean
79.5 ± 0.5 mm
Straight Straight Straight Drop in Curve
HF*: High Speed Cutter (full cut only)
M-T505 Series
100 mm / sec. max.
Parallel (IEEE 1284 bidirectional)
or RS-232
®
10~16 VDC
82.5 ± 0.5 mm
Straight Straight
9