Advertisement
Advertisement
Table of Contents
Related Manuals for Tannoy TS10
Summary of Contents for Tannoy TS10
-
Page 2: Warnings And Precautions
® Technical Specifications Introduction Owner’s Manual- TS8 & TS10 Subwoofers These high performance subwoofers have been built and tested with care and precision, to provide first class performance and reliable operation. To ensure maximum benefit from ownership and for reasons of safety, please read the following information before using for the first time. - Page 3 OPERATIONAL OVERVIEW Electrical Requirements IMPORTANT A mains cable is supplied with an IEC moulded socket at one end and a moulded mains plug at the other end. Where the moulded plug is fitted with a mains fuse, always replace with the same 5A rated fuse.
-
Page 4: Fuse Protection
Never remove the rear panel of the unit, as there is a risk of electric shock. There are no user serviceable parts inside the unit. Always refer servicing to your Tannoy dealer or authorised service agent. Avoid violent shocks to the unit during packing or transportation. -
Page 5: Installation
OPERATIONAL OVERVIEW Installation FITTING OF FEET Screw the four cones into the inserts on the base of the cabinet. Spikes and lock nuts are provided to provide stability when used on a carpet. For use on a wooden floor, the spikes should be inverted. CONNECTING TO YOUR SYSTEM For 2 channel stereo use, if your preamplifier has a spare set of outputs, connect left and right to the subwoofer L and R phono inputs using screened cable. -
Page 6: Channel Stereo
OVERLOAD PROTECTION All Tannoy TS subwoofers are provided with circuitry to limit the maximum sound output, in order to eliminate audible distortion. This circuitry will normally operate unnoticed. If however distortion is heard, this indicates the unit is being severely overloaded, and to avoid damage, the input level should be reduced immediately. -
Page 7: Ts8 Equipment Overview
OPERATIONAL OVERVIEW TS8 Equipment Overview... - Page 8 OPERATIONAL OVERVIEW TS10 Equipment Overview...
-
Page 9: Specifications
Mains Fuse Maximum Power Consumption Warranty Tannoy adopts a policy of continuous improvement and product specification is subject to change. E. & O.E. This equipment has undergone safety and EMC testing, and complies with the European Low Voltage Directive and Electromagnetic Compatibility Directive, together with the requirements of the Canadian Standards Association (CSA). - Page 10 Tannoy Loudspeakers are designed and manufactured in Great Britain by: Tannoy Ltd, Rosehall Industrial Estate, Coatbridge, North Lanarkshire, ML5 4TF, SCOTLAND Telephone: +44 (0)1236 420199 Fax: +44 (0)1236 428230 Tannoy North America Inc, Suite 1. 335 Gage Avenue, Kitchener, Ontario, CANADA, N2M 5E1...
Need help?
Do you have a question about the TS10 and is the answer not in the manual?
Questions and answers