Craftsman 152.211620 Owner's Manual page 3

GENERAL SAFETY iNSTRUCTiONS
Operating a Bench Grinder can be dangerous if safety
and common sense are ignored, The operator must be
familiar with the operation of the tool, Read this manual
to understand this Bench Grinder, DO NOT operate this
Bench Grinder if you do not fully understand the limita-
tions of this tool, DO NOT modify this Bench Grinder in
any way,
BEFORE USUNG THE BENCH GRUNDER
9,
10,
11,
12,
CHmLDPROOF THE WORKSHOP AREA by remov-
ing switch keys, unp,ugging tools from the electrical
recaptacles, and using padlocks,
DO NOT use electrical tools in the presence of
flammable liquids or gasses,
ALWAYS UNPLUG THE TOOL FROM THE ELEC-
TRmCAL RECEPTACLE when making adjustments,
changing parts or performing any maintenance,
KEEP PROTECTmVE GUARDS mNPLACE AND mN
WORKmNG ORDER,
To avoid serious injury and damage to the tool, read
and follow all of the Safety and Operating instructions
before operating the Bench Grinder,
2,
3,
4,
5,
READ the entire Owner's Manual, LEARN how to
use the tool for its intended applications,
GROUND ALL TOOLS, if the tool is supplied with a
3oprong plug, it must be plugged into a 3-contact
electrical receptacle, The 3rd prong is used to
ground the tool and provide protection against
accidental electric shock, DO NOT remove the 3rd
prong, See Grounding instructions on page 4,
AVOID A DANGEROUS WORKING ENVIRON-
MENT. DO NOT use electrical tools in a damp
environment or expose them to rain,
DO NOT use electrical tools in the presence of
flammable liquids or gasses,
ALWAYS keep the work area clean, well lit, and
organized, DO NOT work in an environment with
floor surfaces that are slippery from debris, grease,
and wax,
6,
7,
KEEP VISITORS AND CHILDREN AWAY. DO NOT
permit people to be in the immediate work area,
especially when the electrical tool is operating,
DO NOT FORCE THE TOOL to perform an opera-
tion for which it was not designed, it wiii do a safer
and higher quality job by only performing operations
for which the tool was intended,
8,
WEAR PROPER CLOTHING. DO NOT wear loose
clothing, gloves, neckties, or jewelry, These items
can get caught in the machine during operations
and pull the operator into the moving parts, The
user must wear a protective cover on their hair, if
the hair is long, to prevent it from contacting any
moving parts,
13,
14,
15,
16,
17,
17,
19,
20,
21,
AVOID ACCIDENTAL STARTING, Make sure that
the power switch is in the "OFF" position before
plugging in the power cord to the electrical
receptacle,
REMOVE ALL MAINTENANCE TOOLS from the
immediate area prior to turning "ON" the Bench
Grinder,
USE ONLY RECOMMENDED ACCESSORIES,
Use of incorrect or improper accessories could
cause serious injury to the operator and cause
damage to the tool, if in doubt, check the instruction
manual that comes with that particular accessory,
NEVER LEAVE A RUNNING TOOL UNATTENDED,
Turn the power switch to the "OFF" position, DO
NOT leave the tool until it has come to a complete
stop,
DO NOT STAND ON A TOOL, Serious injury could
result if the tool tips over or you accidentally contact
the tool,
DO NOT store anything above or near the tool
where anyone might try to stand on the tool to
reach it.
MAINTAIN YOUR BALANCE. DO NOT extend
yourself over the tool, Wear oil resistant rubbersoled
shoes, Keep floor clear of debris, grease, and wax,
MAINTAIN TOOLS WITH CARE, Always keep tools
clean and in good working order, Keep all blades
and tool bits sharp,
EACH AND EVERY TIME, CHECK FOR DAMAGED
PARTS PRIOR TO USING THE TOOL, Carefully
check all guards to see that they operate properly,
are not damaged, and perform their intended func-
tions, Check for alignment, binding or breaking of
moving parts, A guard or other part that is damaged
should be immediately repaired or replaced,
SAVE THESE INSTRUCTIONS.