Canon EOS-1D Mark II Instruction Manual page 66

Editing RAW Images
Click White Balance Function
You can automatically adjust the white balance simply by clicking a point in a neutral part of the
image.
1
Click the [Click] button.
When you move the cursor over
the image, the cursor [ ] changes
to [ ].
2
Click a point in a neutral part of the image.
If you click on another point over the image, the white balance is adjusted again.
If you finish this operation, click the [Click] button or right-click.
The image is adjusted based on the average value of the range of 5
clicked point.
You can also adjust the white balance by clicking an achromatic color (neutral gray) part
of the image.
3-14
5 pixels from the