Canon EOS-1D Mark II Instruction Manual page 36

Editing RAW Images
Click White Balance Function
You can automatically adjust the white balance simply by clicking a point in a neutral part of the
image.
1
Click the [Click (RAW)] button.
When you move the cursor over
the image, the cursor [ ] changes
to [ ].
2
Click a point in a neutral part of the image.
If you click on another point over
the image, the white balance is
adjusted again.
If you finish this operation, click
the [Click (RAW)] button or right-
click.
The coordinates of the cursor position and the RGB values (8-bit conversion) of an
image are displayed in the lower-left of the main window (2-2).
The image is adjusted based on the value of 1
You can also adjust the white balance by clicking an achromatic color (neutral gray) part
of the image.
Personal White Balance
You can apply the personal white balance (3-15) that you registered in the edit window or the
edit image window to images.
Click the [1], [2] or [3] button.
The registered personal white
balance is applied to the image.
You cannot use the personal white balance if you have not registered it.
2-22
1 pixels from the clicked point.