Panasonic Viera TC-P42X3 Owner's Manual page 43

Use this procedure when changing the channel setup or
changing the channel display.
Also, use this to add or skip channels from the channel list
manually.
You can select a channel tuning mode (Digital only/Analog
only) in "Channel surf mode"(p. 48)
Li_Select "Edit"
_ Select the item to edit
Favorite
Caption Add
R G
Proceed to
_nextpage
Go backtothe previous
page
** Caption:
Changes the station
identifier
** Favorite:
Registers channels to the
Favorite List
_, Add:
Adds or skips channels
RETURN
Select or edit the station identifier.
(maximum 7 characters available)
_ Favorite
_Set favorite| Select the number
@ Add RETURN
Press OK to select "Yes (add)" or "No (skip)" @
@ Move the cursor to a channel number
_ Select "Apply"
To cancel the Edit
Check the signal strength if interference is found or freezing occurs on a digital image.
_or
intensity
@ If the signal is weak, check the antenna.
If no problem is found, consult your local dealer.
@ Not available if "Cable" is selected in "ANT in" (see p. 42).
@ Available only for digital antenna channels.
®
FR
Q_
(C2
_3
Q_
GO
(C2
©
Z3-
_3
('D
43