Panasonic Viera TC-P42X3 Owner's Manual page 38

Before using a Network camera, you need to register the camera as shown below. You can also set to
Default camera or Disconnect/Delete the registered cameras.
_lbPress "Network cameras list" and
display screen
@7 Set Network camera setting
@_ Start camera search.
@ Before you start to search for a camera, switch the
camera to registration mode.
® Search condition also depends on "Network settings"
@*Delete camera information.
P !
! |
!
@For this operation, please refer to the operating
manual for the Network camera.
@
_> Disconnect to camera.
"Disconnected" will be displayed in "Status".
@*Set to default use.
Displayed "(Default)" next to camera name.
(Available only when reconnecting)
_ Connect to Camera. "Connect" will be displayed in
"Status".
(1_Select "Software update" @ Press OK to start the Software update screen
_i_select _3_
Follow directions on the screen
@Set "Clock" first. (p. 15)
_2_OK
38