NWZ-X1050/X1051/X1060/X1061
4-1-3. Standby current check (DSVCHK)
This mode is used in case standby current is checked.
Checking method:
1. Enter the test mode.
2. Press the [
]/[
] key to select the "POWER", and press
>
.
the [
] key to enter the minor item.
u
3. Press the [
]/[
] key to select the "DSVCHK".
>
.
4. Press the [
] key, enter the state of the deep sleep.
u
5. Press the [HOME] key, release the state of the deep sleep.
Screen display
POWER DSVCHK
OK
6. Press the [HOME] key, return to minor item selection screen.
4-1-4. Charge current check (CHGCHK)
This mode is used in case charge current is checked.
Checking method:
1. Enter the test mode.
2. Press the [
]/[
] key to select the "POWER", and press
>
.
the [
] key to enter the minor item.
u
3. Press the [
]/[
] key to select the "CHGCHK".
>
.
4. Press the [
] key, the charge setting is displayed.
u
Screen display
POWER CHGCHK
AC
AC
5. In this state, each time the [
for the charge is changed as shown in the table below.
Display
CHG_XCHGEN
AC
L
USB500
L
USB100
L
6. Press the [HOME] key, return to minor item selection screen.
16
] key is pressed, the port setting
>
Port control
CHG_PEN1
CHG_PEN2
H
H
H
H
H
L
4-1-5. Battery voltage detection check (BATTCHK)
This mode is used in case battery voltage is checked.
Checking method:
1. Enter the test mode.
2. Press the [
]/[
] key to select the "POWER", and press
>
.
the [
] key to enter the minor item.
u
3. Press the [
]/[
] key to select the "BATTCHK".
>
.
4. Press the [
] key, the battery voltage is displayed.
u
When the battery voltage cannot be confi rmed, "ERROR" is
displayed.
Screen display
POWER BATTCHK
X.XXXV
X.XXXV: Battery voltage
5. Press the [HOME] key, return to minor item selection screen.
4-2. Audio (AUDIO)
While playing the audio track, it's in a repeat state. If [BACK] key
is pressed, it's stopped.
Press the [
] key to switch the HP/LINE/SPEAKER.
.
Screen display
MPTAPP (X.XX.XX)
POWER
AUDIO
OUTPUT
VIDEO
SN
OTHER
F1
CLESTE
F2
DAC
SEPLR
WIFI
SEPRL
FM
MAXOUT
NC
NMLZR
SHUTDOWN
SPCHK
EXITTEST
SPKCHK
USER1
USER2
USER3