Snap-On 870013 Instruction Manual
  1. Manuals
  2. Brands
  3. Snap-On Manuals
  4. Nail Gun
  5. 870013
  6. Instruction manual

Snap-On 870013 Instruction Manual

15 gauge angled finish nailer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
FOR CUSTOMER SERVICE
PARA EL SERVICIO
PARA EL CONSUMIDOR
1-888-278-8092
Printed in Taiwan
®
®
SNAP-ON
IS A TRADEMARK LICENSED BY SNAP-ON
CORP.,
U.S.A., WHICH DOES NOT MANUFACTURE OR
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE
DIRECTED TO:
©COPYRIGHT 2007 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA
870015 – 18 Gauge 2" Brad Nailer _Rev 9/6/07
15 GAUGE ANGLED FINISH NAILER

INSTRUCTION MANUAL

THIS
MANUAL
CONTAINS
IMPORTANT
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO
COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR SNAP-ON
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT 1-888-278-8092. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION.
MODEL #870013
INFORMATION
REGARDING
SAFETY, OPERATION,

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 870013 and is the answer not in the manual?

Questions and answers

Related Manuals for Snap-On 870013

Summary of Contents for Snap-On 870013

  • Page 1: Instruction Manual

    DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE PARA EL CONSUMIDOR DIRECTED TO: IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR SNAP-ON ©COPYRIGHT 2007 ALLTRADE TOOLS, LLC. PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS CONGRATULATIONS! Thanks for choosing this product. Our aim is to provide you with the highest quality prod- CONGRATULATIONS! ......... 2 ucts, and we want you to be totally satisfied with your product and our Customer Service.

  • Page 3: Important Information About This Manual

    IMPORTANT INFORMATION ABOUT THIS MANUAL CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, Improper maintenance and operation are responsible for the majority of accidents if not avoided, may result in property damage. involving angled finish nailers. The largest portion of these could be prevented by recognizing the basic safety rules and precautions.
  • Page 4 Always use hearing protection to protect your ears against Do not connect angled finish nailer to an air source capable of hearing loss due to exhaust noise. Always wear proper safe- generating more than 200 psi (14.06 kg/cm G). Over-pressurizing ty glasses to prevent injuries to the eyes from fragments of the angled finish nailer will result in bursting, abnormal operation or the work piece, defective nails or other debris caused by using the angled...

  • Page 5: Functional Description

    COMPONENT INSTALLATION Thoroughly clean and maintain the angled finish nailer after every use. Never use a non-relieving air coupler with the angled Lubricate moving parts to prevent rust and minimize friction-related wear. Wipe finish nailer. Always use couplers that release any built-up charge in the angled down the entire tool and remove all dust from the moving parts.

  • Page 6: Operating The Angled Finish Nailer

    To improve the connection between the quick disconnect and air nailer, and to help OPERATION IN SINGLE SEQUENTIAL ACTUATION MODE prevent oxidation, apply PTFE tape or joint compound to the connector threads To select the Single Sequential Actuation Mode (see before insertion.

  • Page 7: Adjusting Depth Of Nailing

    To select Contact Sequential Actuation Mode (see Figure 2): 1. Press and hold Actuation Selector embedded in the Always disconnect the air nailer before making any trigger. adjustments to the nail depth knob. 2. Rotate Actuation Selector up to the Contact USING THE HOOK Sequential Actuation (TTT).

  • Page 8: Required Daily Preparation

    In order to prevent the surface of the work piece from being scratched or damaged, 4. With work piece contact against the work piece, pull trigger. The trigger must use the nose adapter. Install nose adapter by fitting the protrusion on the inside of operate smoothly.

  • Page 9: Changing Direction Of Exhaust Air

    MAINTENANCE DO NOT hold the trigger in a half-pulled position. This STORAGE OF NAILS could cause an unexpected nailing to occur if the work piece contact is permit- Always handle nail strips and their box very carefully. If the nail strips have been ted to re-contact the work piece.

  • Page 10: Mandatory Maintenance

    TROUBLESHOOTING Remove the air nailer from use and schedule to have it Most minor problems can be resolved quickly and easily using the troubleshooting repaired at an authorized repair facility if the work piece contact is binding table below. For problems that cannot be solved, contact Customer Service (toll or not moving freely.

  • Page 11: Parts Diagram

    PROBLEM POSSIBLE CAUSE SOLUTION Drives nails properly during normal nailing Check inside diameter of Switch to air hose with operations, but fails to air hose. larger inside diameter. drive nails fully at faster operating speeds. PARTS DIAGRAM PARTS LIST ITEM NO. PART NO.
  • Page 12 ITEM NO. PART NO. DESCRIPTION ITEM NO. PART NO. DESCRIPTION B0600-1861 Piston Set A0306-1161 Tail Cover A0313-0461 Spacer A0011-0161 Spring Pin 3*24 A0313-0361 Spacer K0500-1511 Trigger Set A0303-0861 Cylinder A0005-0311 Pin Retainer 5.5*2 A0200-1571 O-Ring 43.8*2.5 A0011-0241 Spring Pin 3*26 A0200-0981 O-Ring 44.7*3.5 A0712-1261...

  • Page 13: Specifications

    ITEM NO. PART NO. DESCRIPTION SPECIFICATIONS A0712-1431 Cover MODEL NUMBER 870013 A0005-0031 Washer #5*1.2t AIR PRESSURE 70-120 PSIG (5.0- 8.5 kg/cm A0000-0181 Screw M5*10 NAIL LENGTH 1 1/4" (12.5 mm) - 2 1/2" (25 mm) A0707-0651 Pusher NAIL CAPACITY 110 NAILS A0102-0031 Spring Set A0000-0331...

  • Page 14: Year Limited Warranty

    Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail cumstances shall Alltrade bear any responsibility for loss of the unit, loss of time or purchaser of the accompanying SNAP-ON™ portable air tool and no one else all rental, inconvenience, commercial loss, or consequential damages.
  • Page 15 AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY If your product is not covered by this warranty, please call our Customer Service WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR Department at 1-888-278-8092 for general repair information, and charges and the CAUSE OF ACTION ARISING THEREFROM OR BASED THEREON.

Table of Contents