Panasonic AKHRP200 Operating Instructions Manual page 6

Setup.mode.
(continued)
„ Setup.mode.menu.configuration
„
Setup mode is comprised of the menus and submenus listed in the table below.
Menu
UP
ND CC SHT SYNC CAMERA
M.GAIN M.PED
DATA
SET
IRIS
DOWN DISPLAY SELECT
SET UP ND/CC M.GAIN/M.PED SHUTTER
SHIFT
+
SAVE/LOAD EXIT EXECUTE
UP+DOWN
Press <SELECT>to select a menu number.
No. Menu.item
1 Set camera number
2 Save scene file to/load scene file
from memory card
3 Save user file to/load user file
from memory card
4 Save lens file to/load lens file
from memory card
5 Save ROP configuration file to/
load ROP configuration file from
memory card
6 Format memory card
7 Select/set flare and pedestal
8 Set buzzer (beep/Call)
9 Set display brightness (LED/7-
segment display)
10
11
12
For future use.
13
14
15
16 Initialize settings
17 Confirm version
18 Save unit data to memory card
19 Upgrade software
*
1
These functions are controlled by Save ROP configuration file to/load ROP configuration file from memory card
These functions are initialized when you perform settings initialization.
„ Files.stored.on.a.memory.card
„
In setup mode, the following files are saved to or loaded from a memory card by the unit. The fixed file names assigned by the unit must not be changed
on a computer. If the file names are changed, they can no longer be processed by the unit.
Files.stored.on.a.memory.card
Scene file
User file
Lens file
ROP configuration file
Unit data file
6
UP
ND
10-19
M.GAIN
DATA
SET
No.
DOWN DISPLAY SELECT
SELECT
ND/CC M.GAIN/M.PED SHUTTER
SET UP
SHIFT
+
SAVE/LOAD
UP+DOWN
Press <SAVE/LOAD> to select a submenu.
Light.
indication
- -
* 1
ND Save to memory card
CC Load from memory card
ND Save to memory card
CC Load from memory card
ND Save to memory card
CC Load from memory card
ND Save to memory card
CC Load from memory card
- -
*
1
- -
* 1
- -
* 1
ND LED
CC 7-segment display
- -
ND Display version No (first digits)
CC Version No (middle digits)
SHT Version No (last digits)
- -
- -
SCENE1.BIN to SCENE4.BIN
USER1.BIN to USER3.BIN
LENS01.BIN to LENS32.BIN
ROP_OPE.BIN
ROP_INFO.BIN
Submenu
CC SHT SYNC CAMERA
M.PED 10-19
No.
IRIS
SELECT
EXIT EXECUTE
Use <UP> or <DOWN> to select a set value or
an operation.
Use <EXECUTE> to confirm an entry.
Settings.and.operations 7-segment.display.(display.and.selection)
Camera number (1 to 19)
Scene files (1 to 4)
Scene files (1 to 4)
User files (1 to 3)
User files (1 to 3)
Lens files (1 to 32)
Lens files (1 to 32)
-
-
-
FLARE/PED (FL/PE)
Enable/disable buzzer (on/off)
3 levels (bright/intermediate/low)
3 levels (bright/intermediate/low)
-
Displays the first 3 digits
Displays the middle 2 digits
Displays the last 3 digits
-
-
Filename
Set.value/Selected.operation
UP
ND CC SHT SYNC CAMERA
M.GAIN M.PED 10-19
DATA
SET
No.
IRIS
DOWN DISPLAY SELECT
SELECT
ND/CC M.GAIN/M.PED SHUTTER
SET UP
SHIFT
+
SAVE/LOAD EXIT EXECUTE
UP+DOWN
Default.
value
1
1
1
1
1
1
1
-
-
-
FL
on
Bright
Bright
-
-
-
-
-
-