Carrier Frequency - Hitachi SJ300 Series Replacement Manual

138 Relay output terminal RYA signal selection
139 Relay output terminal RYB signal selection
140 Relay output terminal RYC signal selection
141 Digital operator expanded function setting
142 O/O2 input span calibration
143 OI input span calibration

4.3 Carrier frequency

setting
Digital
Remote Operator
operator
- F-48 RELAY RYA RUN
- RELAY RYB CST
- RELAY RYC OTQ
F14 - -
Ａ０
A80 - - -
A81 - - -
23/24
code
(Digital
operator)
The SJ300 does not have relay outputs.
- - Please use L300PTM (Control circuit terminal block for the
L300P).
- -
- -
- -
In the case of the SJ300, O and O2 terminal can be calibrated
C081/C083 Factory-calibrated independently.
available.
C082 Factory-calibrated Zero calibration (C122) is also available.
Zero calibration (C121/C123) is also