Hitachi L300P Series Quick Reference Manual page 26

Func.
Code
B022 Overload restriction setting
B023 Deceleration rate at overload restriction
B024 Overload restriction operation mode (2)
• 00 Disabled
• 01 Enabled for accel and constant speed
• 02 Enabled for constant speed only
B025 Overload restriction setting (2)
B026 Deceleration rate at overload restriction (2)
B031 Software lock mode selection
• 00 Low-level access, [SFT] blocks edits
• 01 Low-level access, [SFT] blocks edits
(except F001 and Multi-speed parameters)
• 02 No access to edits
• 03 No access to edits except F001 and Multi-
speed parameters
• 10 High-level access, including B031
B034 Run/power on warning time
B035 Rotational direction restriction
• 00 Enable for both directions
• 01 Enable for forward only
• 02 Enable for reverse only
B036 Reduced voltage start selection
• 00 Short
• 01, 02, 03, 04, 05 (middle)
• 06 Long
B037 Function code display restriction
• 00 Display all
• 01 Display only utilized functions
• 02 Display user-selected functions only
(configure with U01 to U12)
B080 [AM] terminal analog meter adjustment
B081 [FM] terminal analog meter adjustment
B082 Start frequency adjustment
B083 Carrier frequency setting
Name / Description
24
Default
Value
–FE2/–FU2/ Value
–FR
Rated
current x
1.20 / 1.10 /
1.20
1.00 / 15.00
/ 1.00
01
Rated
current
x 1.20
1.00
01
0.
00
06
00
180
60
0.50
3.0
Set