Table of Contents
Advertisement
5-64
AP-51xx Access Point Product Reference Guide
1. Select
Network Configuration
access point menu tree.
2. Select either the
enabled for the selected radio and their existing configurations.
The WLANs displaying for the selected radio were assigned when the WLAN was created
or modified. A single WLAN can be assigned to either radio, and if necessary have different
bandwidth management configurations. To modify a WLAN-to-radio assignment, see
Creating/Editing Individual WLANs on page
3. Use the
receive access point services. Select one of the following three options:
First In First Out
Round-Robin
Radio 1(802.11b/g)
Bandwidth Share Mode
WLANs receive services from the
first-served basis. This is the default setting.
Each WLAN receives
access point
->
Wireless
->
Bandwidth Management
or
Radio 2(802.11a)
5-30.
drop-down menu to define the order enabled WLANs
access point
access point
services in turn as long the
has data traffic to forward.
from the
tab to display the WLANs
on a first-come,
Advertisement
Table of Contents
