Remove The Pf Motor Assembly - Epson Stylus COLOR 880 Service Manual

EPSON Stylus COLOR 880

4.2.4.9 Remove the PF Motor Assembly

1) Remove the Upper Housing (Refer to Section 4.2.1.)
2) Remove the Waste Ink Absorber Assembly. (Refer to Section 4.2.4.2.)
3) Move the Loop Scale gradually.
4) Remove the Plain Washer (2.9x0.5x5) from the Combination Gear 15, 25
and then remove the Combination Gear 15, 25 carefully. Refer to Figure
4-63.
Combination
Gear 15, 25
Figure 4-63. Removing the Plain Washer &
Combination Gear 15,25
Disassembly and Assembly
Plain Washer
2.9 x 0.5 x 5
Disassembly Procedures
5) Holding the PF Motor, remove one No.5 screw and PF Motor fixing screw
securing the PF Motor, and remove the motor from the Left Side Frame.
Refer to Figure 4-64.
No. 5 Screws securing
the PF Motor
Figure 4-64. Removing the PF Motor
Do not damage the teeth of the Combination Gear 15, 25.
In case the PF motor is removed or replaced, the backlash
between the PF pinion gear and the Gear 57 has to be set with
a suitable value. Refer to the Chapter 5 (Section 5.2.2).
Revision A
PF Motor Fixing Screw
PF Motor
114