2.2.2 Carriags Drive Mechanism
carriage unit to move along the carriage guide shaft from left 10 right or vice versa. The mrriage
drive motor on this printer is a 4-phase, 2@ole, hybrid-type stepping motor mechanb, allowing
the printer to stop the carriage or change carriage movement at any position. The position cd the
carriage is reqnimd by the home positkm sensor, and poeition rnformatkm is fed back to the
carriage drive control arcuit to determine the motor phase switching mode.
Table 2-1. Carriags Orive Motor SpSCifkation8
Motor Type
Drive Voltage
Coil Reaietance
Drive Frequency
Excitation Mode
2.2.2.1 Adjust Lever
Set the adjust lever, attached to the carriage unit, to the appropriate positicm for the thickness of the
paper used for printing.
Paper
cut aheet
Plain paper, bond paper
v i
35
960- 6oooppe
1-2 phaee excitation
Table 2-2. Adjust Lever Position
Type
Horizontal (A)
Vertical (B)
\
Figure 2-7. Adjust Lever
Platen Gap
—
.
Envelopes
/ "