Spare Wheel 3 - Vauxhall Combo Owner's Manual

Picture no: 12454s.tif
Spare wheel
3
The spare wheel is stored beneath the
floor.
1. Fully release the hexagon bolt in the load
compartment floor using the wheel bolt
wrench. Vehicle tools – see page 151.
2. Lift the spare wheel holder.
Picture no: 12455s.tif
3. Unhook the catch and lower the spare
wheel.
4. Detach the safety cable.
5. Lower the holder fully and take out the
spare wheel.
Vehicles with a temporary spare wheel 3
have a spacer ring between the
temporary spare and the vehicle
underbody.
6. Wheel changing – see page 152.
Self-help
Picture no: 16493s.tif
7. Place the replaced wheel in the spare
wheel holder with the outside of the
wheel facing upwards.
If a full specification wheel is stowed, do
not fit the spacer ring between the
wheel and the vehicle underbody.
8. Lift the spare wheel holder, insert the
safety cable.
9. Lift the spare wheel holder and engage
in the catch. The open side of the catch
must point towards the rear.
10. Turn the hexagon bolt in the load
compartment floor with the wheel bolt
wrench to raise the spare wheel holder
all the way up.
149