Troubleshooting - Baumatic BW28 User Manual

Troubleshooting

Cooler, please check it against the table below before calling for service.
Symptoms
Your Wine Cooler is Not
Working
Not Cold Enough
Too Cold
Inside light flashes
Frost showing
Your Baumatic BW28 Wine Cooler
– If you are having a problem with your Wine
Possible Cause
- No power supply
- Low voltage
-Fuse Broken
- Your cooler is too
close to another heat
source
- Gasket seals are dirty
- Poor Ventilation
- Fan is not working
- The door has been
opened too frequently,
left open too long, or
was not closed tightly
- Your Wine Cooler's
running temperature
may be too high
- Too low temp. setting
- Ambient Temperature
is too low
- Set temperature is
higher than inside
temperature
- Too much humidity or
too low inside
temperature
15
Solutions
- Make sure it's plugged
in or check circuit
breaker.
- Ensure normal voltage.
- Change fuse.
- Keep the wine cooler
away from direct sunlight
or other heat sources.
- Clean the gasket seals.
- Ensure that the wine
cooler is well-ventilated
and keep things away
from the fans.
- Make sure the plug is
connected. Alternatively,
you may need to have the
fan changed.
- Close the door tightly
and leave shut for a
while. Do not open the
door too frequently.
- Check the temperature
adjustor & set to a lower
(cooler) temperature.
- Raise temp. setting.
- Turn heating on in room
or move your Wine Cooler
to a warmer place.
- Adjust the temperature
adjustor.
- Unplug to defrost; plug
in again after the ice
thaws.