Troubleshooting - Baumatic BWE40 Instruction Manual

Troubleshooting –
If you are having a problem with your Wine
Cooler, please check it against the table below
before calling for service.
Symptoms
Your Wine Cooler is
Not Working!
Not Cold Enough!
LL error code showing
Your Baumatic BWE40 Wine Cooler
Possible
Cause
- No power supply
- Low voltage
- Circuit breaker
tripped
-Fuse Blown
- Your cooler is too
close to another heat
source.
- The door gasket does
not seal properly
- The door is not
completely shut
- The door has been
opened too frequently,
left open too long, or
was not closed tightly
- Your Wine Cooler's
running temperature
may be too high
- The temperature in
your wine cooler is too
low.
16
Solutions
- Make sure it's plugged
in.
- Ensure normal voltage.
- Flick the breaker
switch back on.
- Change fuse.
- Keep the wine cooler
away from direct
sunlight or other heat
sources.
- Make sure the seals
aren't damaged & that
you can close the door
properly.
- Ensure nothing is
forcing the door open
from within.
- Close the door tightly
and leave shut for a
while. Do not open the
door too frequently
afterwards.
- Check the temperature
adjustor & set to a
cooler temperature.
- Increase the temperature
in the wine cooler, using
the relevant button on the
control panel.