Cambio De La Bombilla; Changement De L'ampoule - Singer 4411 Instruction Manual
Hide thumbs
Also See for 4411:
- Service manual (30 pages) ,
- Instruction manual (31 pages) ,
- Service manual (30 pages)
Table of Contents
Advertisement
Cambio de la bombilla
Desconecte la máquina de la alimentación principal retirando
el conector desde la toma de corriente.
Sustituir la bombilla con otra del mismo tipo de 15
(tensión de 110-120V área / 220-240V área).
- Afloje el tornillo (A) según se ilustra. (1)
- Retire la placa frontal (B).
- Desenroscar la bombilla e instalar una nueva (C). (2)
- Volver a colocar la placa frontal y apretar el tornillo.
En caso de cualquier duda, consulte a su Distribuidor
®
Autorizado SINGER .
Changement de l'ampoule
Débrancher la machine de l'alimentation électrique en retirant
la prise!
Remplacer l'ampoule par une ampoule du même type de 15
voltios
Watts (pour 110-120V / 220-240V).
- Desserrer la vis (A) comme indiqué. (1)
- Enlever la plaque frontale (B).
- Dévisser l'ampoule et installer une nouvelle (C). (2)
- Reposer la plaque frontale et visser la vis.
En cas des problèmes, contactez le magasin SINGER le
plus proche.
®
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 4411 and is the answer not in the manual?
Questions and answers
I am filling the bobbin but when I move the bobbin in the position to fill it does not turn
The bobbin on the Singer 4411 is not turning when filling because the bobbin winding spindle is loose and does not snap into place. This prevents it from engaging properly. Possible causes include:
1. The spindle mechanism is not locking in position when pushed to the right.
2. The internal washer or spring that engages the winding system may be stuck or dirty.
3. The handwheel may not be engaging properly if it was turned while the bobbin winder was engaged.
4. Debris or dust inside the mechanism could prevent proper engagement.
Possible solutions:
- Ensure the bobbin snaps into place on the spindle.
- Check for dirt or dust and clean the mechanism.
- Try manually wiggling the handwheel to see if the washer pops back into place.
- If the issue persists, inspect the internal components for misalignment or damage.
This answer is automatically generated