Changing Bulbs; Direction Indicators - Saab 9-3 Owner's Manual

93_US_7carcare_MY09.fm Page 218 Tuesday, April 15, 2008 11:26 AM
218 Car care

Changing bulbs

WARNING
Before changing a bulb in the engine
bay, switch off the engine to avoid the
danger of fingers and hands being
injured by moving parts.
The radiator fan can cut in even when the
engine is switched off.
NOTICE
Switch off the ignition before changing a
bulb, to avoid possible short-circuiting.
Auto checking of lights
The bulbs that are most important from the
point of view of traffic safety are monitored
by the car's electrical system. If one of these
bulbs should fail, a message will be dis-
played on the SID.
Example of SID message:
Left low beam failure.
The following bulbs are not checked: park-
ing lights, front fog lights, reversing lights,
license plate lighting, side marker lights and
side direction indicators.
SportCombi
The tail lights and brake lights consist of
LEDs. If approx. 3/4 of the LEDs on one side
are broken then this is indicated in the SID.
If a stop light bulb fails
SportSedan: If a stop light bulb fails, the
adjacent taillight will act as a stop light to
ensure traffic safety. Change the broken
bulb when possible.
All rear light bulbs are of the same type and
rated 21 W, with the exception of the license
plate lighting which is rated 5 W.