Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZWH 7162 J
Summary of Contents for Zanussi ZWH 7162 J
- Page 1 User manual Washing Machine ZWH 7162 J...
-
Page 2: Table Of Contents
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 14 Control Panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5... - Page 3 • If the machine is situated on a carpeted floor, please aged so that the inside of the washing machine is ac- adjust the feet in order to allow air to circulate freely cessible. under the appliance. Child safety • Always be sure, that there is no water leakage from ho- •...
-
Page 4: Product Description
Product description Detergent dispenser drawer Control panel Door opening handle Rating plate Drain pump Adjustable feet Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak detergent is added at the beginning of the wash programme. -
Page 5: Control Panel
Control Panel On the following page there is a picture of the control panel. It shows the programme selector dial as well as the buttons, pilot lights and the display. These are presented by relevant numbers on the following pages. Programme selector dial EXTRA RINSE button SPIN button... -
Page 6: Display
Economy • light blinking: the door is opening in a few minutes. Only for cottons and synthetic items lightly or normally Display (10) soiled at a temperature of 40°C or higher. The washing time will be prolonged and the washing temperature will be reduced. -
Page 7: First Use
First use • Ensure that the electrical and water connections machine, to remove any manufacturing residue comply with the installation instructions. from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment and • Remove the polystyrene block and any material start the machine. - Page 8 Select the required programme by means of the Important! If an incorrect option is selected, the message programme selector dial (1) Err is displayed for a few seconds and the red pilot light of this button blinks 3 times. Turn the programme selector dial to the required pro- gramme.
-
Page 9: Helpful Hints And Tips
The washing water in the tub will be not emptied out. At the end of the programme The machine stops automatically. Some acoustic signals Interrupting a programme sound and a blinking appears on the display, the pilot Press the button 7 to interrupt a programme which is run- light of button 7 and the pilot light 9 go off. -
Page 10: Washing Programmes
Mould stains: treat with bleach, rinse well (whites and fast • liquid detergents, preferably for low temperature wash coloureds only). programmes (60°C max) for all types of fabric, or spe- Grass: soap lightly and treat with bleach (whites and fast cial for woollens only. -
Page 11: Washing Programmes
Washing programmes Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry COTTONS SPIN REDUCTION 90° - 30° NIGHT CYCLE Main wash - Rinses RINSE HOLD Maximum spin speed at 1600 rpm ECONOMY Max. - Page 12 Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry WOOL SPIN REDUCTION 40° NIGHT CYCLE Main wash - Rinses RINSE HOLD Maximum spin speed at 900 rpm Max. load 2 kg Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics.
- Page 13 Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry SOAK 30° Prewash - Soak for about 40 minutes - Stop with water in the Max. load 7 kg Special programme for heavily soiled laundry. The machine performs a soak at 30°C.
-
Page 14: Care And Cleaning
Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry DRAIN Draining of water Max. load 7 kg For emptying out the water of the last rinse in programmes with the Rinse Hold or Night Cycle option selected. SPIN SPIN REDUCTION Drain and long spin... - Page 15 Cleaning the drawer recess When no more water comes out, unscrew the pump cover by turning it anti-clockwise and remove the filter. Having removed the draw- Use pliers, if necessary. Always keep a rag nearby to er, use a small brush to dry up any water spillages when removing the cover.
- Page 16 Caution! When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is 35°...
-
Page 17: What To Do If
What to do if ... Certain problems are due to lack of simple maintenance or • : problem with the water supply. oversights, which can be solved easily without calling out • : problem with the water draining. an engineer. Before contacting your local Service Centre, •... - Page 18 Problem Possible cause/Solution The drain hose is squashed or kinked. • Check the drain hose connection. The drain filter is clogged. • Clean the drain filter. The machine does not empty and/or An option or a programme that ends with the water still in the tub or a that does not spin: eliminates all the spinning phases has been selected.
-
Page 19: Technical Data
Problem Possible cause/Solution The transit bolts and packing have not been removed. • Check the correct installation of the appliance. The support feet have not been adjusted • Check the correct levelling of the appliance. The machine vibrates is noisy: The laundry is not evenly distributed in the drum. -
Page 20: Consumption Values
Water supply pressure Minimum 0,05 MPa Maximum 0,8 MPa Maximum Load Cotton 7 kg Spin Speed Maximum 1600 rpm Consumption values Programme Energy consumption (KWh) Water consumption (litre) White Cottons 95 °C Cottons 60 °C 1.35 Cottons 40 °C 0.75 Synthetics 40 °C 0.55 Delicates 40 °C... - Page 21 Water inlet Warning! This appliance must be connected to a cold water supply Caution! Before connecting up the appliance to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected Unscrew the three bolts.
- Page 22 Warning! Installation should comply with local The drain hose may be extended to a maximum of 4 water authority and building regulations’ metres. An additional drain hose and joining piece is requirements. available from your local Service Force Centre. The The appliance must be connected to a cold water supply.
- Page 23 The appliance is supplied with a 13 amp plug fitted. Warning! The appliance should NOT be placed on In the event of having to change the fuse in the plug sup- deep pile carpeting. plied, a 13 amp ASTA approved (BS1363/A) fuse must be Note! used.
-
Page 24: Environmental Concerns
Environmental concerns >PP<=polypropylene The symbol on the product or on its packaging This means that they can be recycled by disposing of indicates that this product may not be treated as them properly in appropriate collection containers. household waste. Instead it should be taken to the Ecological hints appropriate collection point for the recycling of electrical To save water, energy and to help protect the environment,... - Page 28 www.zanussi.com/shop...