1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Vacuum Cleaner
  5. Z8800 Series
  6. Owner's manual

Electrolux Z8800 Series Owner's Manual

Electrolux upright vacuum cleaner owner's guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Upright Vacuum Cleaner
Owner's Guide
Household Type
Z8800 Series
IMPORTANT
For any advice
on your cleaner and
to order filters and
accessories,
please telephone the
Electrolux Helpline on
08706 055055
FILTER REPLACEMENT CODE: EF105 and EF106
2—4
IMPORTANT INFORMATION
4
GUARANTEE
5
QUICK REFERENCE
5
HOW TO ASSEMBLE
7
HOW TO USE
10
ROUTINE MAINTENANCE
10
Dust Cup
11
Top Filter
11
Bottom Filter
Clear Blockages/Hose
12
13
Brushroll
13
Brushroll Belt
14
PROBLEM SOLVING
Clear Hose
www.electrolux.co.uk

Advertisement

Table of Contents
loading

Related Manuals for Electrolux Z8800 Series

Summary of Contents for Electrolux Z8800 Series

  • Page 1 Upright Vacuum Cleaner Owner’s Guide Household Type Z8800 Series IMPORTANT For any advice on your cleaner and to order filters and accessories, please telephone the Electrolux Helpline on 08706 055055 FILTER REPLACEMENT CODE: EF105 and EF106 2—4 IMPORTANT INFORMATION GUARANTEE QUICK REFERENCE...

  • Page 2: Important Safeguards

    . Examine the mains supply cable for damage (only after removing the plug from the socket outlet). 3. If there is any sign of damage to the supply cable it MUST be renewed. The repair MUST be carried out by an Electrolux Service Agent or a similar qualified person.

  • Page 3: Before You Start

    This cleaner is double insulated and no earth connection is necessary. It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, consult a qualified electrician, as Electrolux cannot regard the repair of faults on the plug connection as a service that can be given free of charge under the terms of the guarantee.

  • Page 4: Service Checklist

    The guarantee may be invalidated by unauthorised repair or modification of the appliance. d. You may be charged by Electrolux if you call for an engineer to resolve a problem that we believe is covered in the instruction booklet.

  • Page 5: How To Assemble

    HOW TO IDENTIFY PARTS OF CLEANER Items in Carton  cleaner body  handle  hose clip  screws (4 in bag)  dusting brush  combination crevice tool & nested wand  turbo nozzle (on some models) 1) Hose 2) Turbo nozzle 3) Filter screen 4) Self cleaning duster...
  • Page 6 HOW TO ASSEMBLE cont. Step 3: Move the hose out of the way before the next step (Step 4) as shown. Step 4: Attach the tool caddy by inserting the tab as shown, and rotating it forward. Step 5: Fasten the tool caddy with 2 screws.
  • Page 7 HOW TO ASSEMBLE cont. Step 9: Store the dusting brush behind the handle as shown. Step 10: Store the turbo nozzle on the front of the cleaner, above the dust cup, as shown. Push to lock in place. Helpful Hints: Use caution when using this vacuum on area rugs.

  • Page 8: How To Use Accessories

    HOW TO USE CLEANER cont. Warning: to avoid injury, keep loose clothing, fingers, hair, etc. away from moving brushroll. 4) Set Cleaner Height Setting from High setting for long pile to Low for short pile. Note: If cleaner is hard to push, move selector to next highest setting.
  • Page 9 HOW TO USE ACCESSORIES cont. Warning: To reduce the risk of injury from a falling cleaner, always work with the cleaner below you, pushed against the bottom step. Caution: Do not place the cleaner on the stairs as this may cause carpet damage.

  • Page 10: Routine Maintenance

    Maintenance Caution: Turn off the switch and unplug the electrical cord before routine maintenance. Never operate the vacuum cleaner without the filter screen, top and bottom filters in place. Note: When vacuuming carpet fresheners or cleaners, powder, plaster dust, or similar...
  • Page 11 HOW TO MAINTAIN cont. Caution: Make sure On/Off switch is in Off (o) position and power supply cord is unplugged before servicing. Clean and Replace Filters * Part Number Foam Filter EF106 Note: The filter screen is located directly above the dust cup. 1) Clean the Filter Screen: The filter screen is easily removed by...
  • Page 12 HOW TO MAINTAIN cont. How to Clear Blockages in Hose Caution: Make sure On/Off switch is in Off (o) position and power supply cord is unplugged before servicing. 1) Firmly pull the end of the hose from the hose retainer on the back of the vacuum.
  • Page 13 HOW TO MAINTAIN cont. Caution: Make sure On/Off switch is in Off (o) position and power supply cord is unplugged before replacing belt. Belt pulley can become hot during normal use. To prevent injury, avoid touching the motor shaft when checking the belt. Maintain Brushroll Remove hair and...

  • Page 14: Problem Solving

    Problem Solving CAUTION: Turn off the switch and unplug the electrical cord before servicing. Problem Motor will not start. Motor suddenly stops. Does not clean carpet or hard floor No suction at the end of the hose Noise from the brush roll area Cleaner is hard to push Brush roll with not turn Does not clean carpet or floor...
  • Page 16 08706 055055 Thank you for purchasing an Electrolux cleaner. Don’t Forget to Use Genuine Electrolux Belts and Filters Caution: Damages caused by the use of non-genuine parts are not covered by the Electrolux Guarantee. Part No. 79316 Printed in PRC (0X/07)

Table of Contents