Canon VB150 User Manual page 33

Driver-related Log Messages
●P001 File system mounting failure (warning)
AUTOMNT: %1 already mounted or %2 busy
Message
Device name
%1
Mount point
%2
Two memory cards are inserted together or the memory card cannot be mounted
Explanation
because an error occurred when it was last unmounted.
If the card cannot be mounted because an error occurred when it was last unmounted, reboot.
Response
●P003 Memory card error (warning)
AUTOMNT: cannot mount %1 on %2
Message
Device name
%1
Mount point
%2
Explanation Mount processing was cancelled due to a memory card error.
Replace the memory card.
Response
●P004 Device busy (err)
AUTOMNT: %1: device is busy
Message
Device name
%1
Explanation The card was unmounted during file access. This does not occur during normal operation.
If this occurred when Administration Tools Settings Page was used to unmount the
Response
card, reboot.
●P005 Card initialization failed in card slot A (warning)
ENABLER: slota enable err
Message
Card information read from the card inserted in card slot A failed.
Explanation
Re-insert the card or replace the card.
Response
●P006 Card initialization failed in card slot B (warning)
ENABLER: slotb enable err
Message
Card information read from the card inserted in card slot B failed.
Explanation
Re-insert the card or replace the card.
Response
30