Canon VB150 User Manual page 28

●A022 Applet archive load failure (warning)
Message
%1
Explanation
Response
●A023
Status change of external device input (err)
Message
%1
%2
Explanation
Detection of motion (err)
Message
%1
Explanation
●A024 Picture recording suspended and restarted (notice)
Message
%1
Explanation
●A025 Picture recording processing error (warning)
Message
%1
Explanation
Response
25
archive/%1 not found
Applet archive name (glimpse.cab | glimpse.zip | lvapplet.cab | lvapplet.zip |
imagemap.gif | snapanim.cab | snapanim.zip | digits.gif)
Applet archive file does not exist or is corrupted.
Copy the missing (or damaged) file in the '/archive' applet from the CD-ROM and reboot.
a %1 detected at %2
external device input change (front-edge | rear-edge | pulse | notch)
external device terminal (In1 | In2)
A change was detected at external device terminal In1 or In2. front-edge denotes
OFF → ON, rear-edge denotes ON → OFF, pulse denotes OFF → ON → OFF, and
notch denotes ON → OFF → ON. pulse and notch are brief (10-20 milliseconds) ON
and OFF periods detected during OFF and ON states respectively.
motion %1
Motion (detected | stopped)
Detection of motion started or stopped.
picture recording %1
suspended | recovered
Picture recording stopped because of error or picture recording restarted because of
error recovery. Error details will be output as A025.
picture recording failed: %1
busy | index broken | index full | no video data | no storage device | I/O error
This shows the details of an error during picture recording. This message is only
displayed when errors of different types occur. (This message is not displayed if the
same error occurs repeatedly.)
If the problem is busy, no response is required. For index broken (corrupted index
file), repair the index. For index full (number of pictures that can be recorded has
been exceeded), delete some of the recorded pictures. For no video data (video
signal input error or maximum picture size exceeded), check the camera and camera
settings. For no storage device (memory card not inserted), insert a memory card.
For I/O error (input-output error), check the memory card.