Renault Clio Workshop Repair Manual page 34

FRONT
Air bags and seat belt pretensioners
FAULT FINDING- INTERPRETATION OF FAULTS
DF002
present
NOTES
1.dEF
For a micro-cut fault, check the computer supply lines :
- condition of the connections on the computer.
- condition of the computer earths (tracks 6 and 20 of the 30 track connector to front right hand pillar
earth).
- condition/ position of the fuse,.
- condition and tightness of the battery terminals.
2.dEF - 3.dEF
Carry out the operations necessary to obtain the correct supply voltage for the computer:
9 volts 0.1 < correct voltage < 18 volts 0.1
- Check the battery charge.
- Check the charging circuit.
- Check the tightness and condition of the battery terminals.
- Check the computer earth.
AFTER REPAIR
WIRING
Computer supply voltage
1.dEF : Too many micro-cuts
2.dEF : Feed voltage too low
3.dEF : Feed voltage too high
Use the B40 XRBAG adaptor for operations on the computer connector.
None
NOTES
None
NOTES
Erase the computer memory
88-32
88
1AB8651.0