Virtual Connect 2.1X Features That Must Be Disabled In A Vc Domain To Be Part Of The Vc Domain Group With Virtual Connect Firmware 2.0X; Disabling Virtual Connect Manager Traps; Select Any Value Other Than 8Gb As Uplink And Downlink Configuration Speeds - HP BL680c - ProLiant - G5 User Manual

3. Do not modify the SNMP configuration for VC Domain level. The default SNMP configuration for
VC Domain level is Enabled with the Community String equaling Public. This is only available
through the Virtual Connect Manager Command line interface.
Fibre Channel Port Speed cannot be set to 8Gb for a HP Virtual Connect 8-Gb 20-Port Fibre Channel
Module.
Select any value other than 8Gb as the uplink configuration speed when defining a SAN Fabric for a
HP Virtual Connect 8-Gb 20-Port Fibre Channel Module.
Figure 3-7 Select any value other than 8Gb as uplink and downlink configuration speeds
Select any value other than 8Gb as the downlink configuration speed when assigning a SAN Fabric
for a HP Virtual Connect 8-Gb 20-Port Fibre Channel Module.
Virtual Connect 2.1x features that must be disabled in a VC Domain to be part of the VC Domain
Group with Virtual Connect firmware 2.0x
Multienclosure VC Domain is not supported.
Do not configure remote enclosures in the VC Domain or remove the VC Domains that are configured.
28 Managing VC Domains
Figure 3-6 Disabling Virtual Connect Manager traps