Virtual Connect 2.3x features that must be disabled in a VC Domain to be part of the VC Domain
Group with Virtual Connect firmware 2.1x
IMPORTANT:
2.0, you must disable the Virtual Connect 2.3x features in this section and the Virtual Connect 2.1x features
in the following section.
Enhanced SNMP configuration is not supported.
Figure 3-2 Enhanced SNMP configuration
Do not configure the VC Domain using the enhanced SNMP configuration. If necessary, disable the
enhanced SNMP configuration by following these steps:
1.
Do not configure more than five SNMP trap destinations.
2.
Verify that all SNMP trap destinations follow these rules:
a.
b.
c.
26
Managing VC Domains
If you plan to add Virtual Connect 2.3x to a VC Domain Group with Virtual Connect firmware
The Destination Name must be in the following format:
<IP Address of the SNMP Trap Destination>_<Community String>_<0 for
VC-Enet and 1 for VC-FC>
(for example, 192.168.1.1_public_1)
Select the "ipv4" option.
Set the SNMP trap format to "SNMPv1."
Figure 3-3 Adding or editing a compatible SNMP trap destination