Table of Contents
Advertisement
10-20 cm
Energy saving
10
"eco" setting
(model dependent)
If the "Energy saving" button (8*) is
switched on, the energy consumption of the
appliance will be reduced, by means of an
automatic reduction of electricity and water
consumption. A good ironing result will still
be obtained for most of the garments.
Use the normal energy setting for thick and
highly wrinkled fabrics.
Note: If you work with the "Energy
saving" function, the variable steam
regulation and temperature regulation
can still be used as recommended.
11
Auto shut-off
(model dependent)
If during ironing, the steam release button
(15-16*) on the iron handle is not pressed
for a certain length of time (8 minutes), the
steam station will automatically switch off.
The "auto shut-off" pilot lamp (9) will flash
when auto shut-off has been activated.
To switch the steam station back on, press
the steam release button again.
* model dependent
Additional
12
accessories
(model dependent)
Fabric protection soleplate cover
The fabric-protection soleplate cover is
used for steam ironing delicate garments at
maximum temperature without damaging
them. Use of the soleplate cover also does
away with the need for a cloth to prevent
shine on dark materials.
It is advisable to first iron a small section
on the inside of the garment to see if it is
suitable.
To attach the soleplate cover to the iron,
place the tip of the iron into the end of the
soleplate cover and pull the elastic strap
over the lower rear of the iron until it fits
tightly. To release the soleplate cover, pull
the elastic strap and remove the iron.
The fabric-protection soleplate cover may
be purchased from the customer service or
specialist shops:
Accessory code
(After-sales)
571510
Name of accessory
(Specialist outlets)
TDZ2045
BOS CH
9
Hide quick links:
Advertisement
Table of Contents
