Rinsing The Iron Steam Chamber - Bosch TDS2021GB Operating Instructions Manual

Rinsing the iron
15
steam chamber
Caution! Risk of burns!
This procedure helps to remove scale
particles out of the steam chamber.
This cleaning procedure may be performed
occasionally (approximately once a year),
when after a long period of use with very
hard water, scale particles start to come out
of the soleplate.
1. Ensure that the iron is cooled down.
2. Set the temperature selector (14) of the
iron to the "min" position.
3. Fill the tank with tap water.
4. Plug in the mains cable and set the
main power button / switch (12) to the
on position "I".
5. Wait until the "steam ready" indicator
lamp (9) lights up.
6. If the steam station has steam regulator
(10*), set it to the maximum position
7. Hold the iron over the sink or a
container to collect the water.
8. Press the steam release button (15)
and gently shake the iron. Boiling water
and steam will come out, carrying scale
and deposits that might be there. This
could take approximately 5 minutes.
9. Set the temperature selector (14) of
the iron to the "max" position, without
pressing the steam release button
(15). The water in the steam chamber
will start evaporating. Wait until all the
water inside the steam chamber has
evaporated and steam is no longer
coming out from the soleplate.
10. To clean the soleplate (19), immediately
rub off any residue by running the hot
iron over dry cotton cloth.
* model dependent
1
3
5
7
.
9
10
2
4
6
8
5Õ
BOS CH
11