Table of Contents
Advertisement
Available languages
Available languages
6. Error Messages/Troubleshooting
If an error occurs during a measurement, the measurement
is discontinued and a corresponding error code is displayed.
(Example Error no. 1)
Error No.
ER 1
ER 2
ER 3
ER 5
11
Possible cause(s)
The systolic pressure was determined but after-
wards the cuff pressure fell below 20 mmHg.
This situation can occur, for example, if the tube
becomes unplugged after the systolic blood
pressure has been measured. Further possible
cause: No pulse has been detected.
Unnatural pressure impulses influence the
measurement result. Reason: The arm was moved
during the measurement (Artefact).
Inflation of the cuff takes too long. The cuff is
not correctly seated or the hose connection is not
sealed.
The difference between systolic and diastolic is
excesive. Measure again carefully following proper
cuff procedures and ensure measurement under
quiet conditions. Contact your doctor if this
message occurs frequently.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 271245 and is the answer not in the manual?
Questions and answers
Can the memory function be reset
The provided context does not mention a way to reset the memory function of CVS part number 271245. It states that the device automatically stores the last 99 measurements but does not specify whether or how the memory can be cleared.
This answer is automatically generated
how do you reconnect the tube to the machine
To reconnect the tube to the CVS machine with part number 271245, insert the cuff tube into the opening provided on the left side of the instrument, as shown in the diagram.
This answer is automatically generated