Cancelling A Programme And Selecting A Different One; Altering A Programme; Repeating A Section (E.g. Rinse); Skipping A Programme Stage - Miele W 939 WPS Operating Instructions Manual

^ Switch the machine off and on again.
^ Start the new programme as de-
scribed in "Programme start".
Load recognition is switched off if a
programme is re-started. The ma-
chine will wash as for a full load and
the maximum load indicator will light
up.
The machine will accept the following
changes after a programme has
started:
– up to 6 minutes after the start, the
Water plus and Short additional op-
tions can be selected or de-selected
and a different temperature can be
selected for the programme in use.
– the final spin speed can be changed
within the limits for the programme.
Additional functions cannot be
changed if the door has been
opened.
In order to select another programme
the old programme must be cancelled
before the new one can be started.
A programme section can be repeated
or a particular section be selected on
its own.
^ Switch the machine on
18
^ Select the programme
^ Press the START touch pad
^ Press the programme sequence
touch pad repeatedly until the re-
quired position is reached.
For rinsing launcry we recommend us-
ing the Delicates programme.
^ Press the programme sequence
touch pad when the light comes on
next to the section you want to skip.
The programme will then continue with
the next programme stage. The rele-
vant programme sequence indicator
will light up.
If programme locking has been acti-
vated the programme cannot be
changed nor can a programme sec-
tion be repeated or skipped.