To fix water drainage issues from the windscreen on a Fiat Panda:

1. Check the Scuttle Panel: Below the windscreen wipers, there is a scuttle panel with drainage holes. Remove the panel by taking out the fasteners.

2. Unblock Drain Channels: Locate the drain channels on both the left and right sides behind the inner box. These channels may be clogged with dirt and debris.

3. Clean the Drain Holes: The drainage system includes a duckbill-shaped rubber valve. Squeeze it to remove trapped dirt and ensure proper water flow.

4. Remove Windscreen Wipers if Needed: Use a 14mm socket to remove the wipers for better access.

5. Check the Washer Pipe: Ensure the windscreen washer pipe is properly connected and not leaking.

These steps should prevent water from accumulating and leaking into the footwell.

This answer is automatically generated

Pop Adrian

March 16, 2025

How can I change a main bulb light of the Fiat Panda car ?

1 comments:

Mr. Anderson

March 16, 2025

To change the main/dipped beam light bulb on a Fiat Panda, follow these steps:

1. Release clip A (as shown in the manual).
2. Remove cap B to access the bulb.
3. Take out the burnt bulb and replace it with a new one.
4. Refit everything by reversing the removal steps.

These steps ensure a proper replacement of the main/dipped beam light bulb.

This answer is automatically generated