Advertisement
Preparation
Use the remote control unit by pointing
it towards
the remote control
sensor on
the TV/DVD.
Objects
between
the remote control unit and the remote control
sensor may prevent
proper operation.
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not place in an area
with high humidity.
• Do not install or place the remote control unit under direct sunlight. The heat may cause
deformation of the remote control unit.
• The remote control unit may not work properly if the remote control sensor on the TV/DVD
is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or
the TV!DVD, or operate the remote control unit closer to the remote control sensor.
(_=14
To enjoy a clearer
picture, use an outdoor antenna.
The following
is a brief explanation
of the types of
connections
that are used for a coaxial cable. If your outdoor
antenna
uses a 75-ohm
coaxial cable with an
F-type connector,
plug it into the antenna
terminal at the rear of the TV set.
"-1. A 75-ohm system is generally a round cable with F-type _
connector that can easily be attached to a terminal
without tools (Commercially available).
F-type connector
75-ohm coaxial cable (round)
2. A 300-ohm system is a flat "twin-lead" cable that can be
attached to a 75-ohm terminal through a 300/75-0hm
adapter (Commercially available).
300-ohm twin-lead cable (flat)
f
Connecting
Antenna
Cable
Home
Antenna
O Cable without
a
Cable
TV leadqn
terminal
(75-ohm)
CATV converter
_
i_
_:_'_J
m
Coaxial
cable
(commercially
available)
(_) VHF/UHF antenna_
|
Home
Antenna
_
terminal
(75-ohm)
Coaxial
cable
(commercially
available)
G Combination
VHF/_
UHF antenna
_,_
or
_
_,_ aOO-obm twin-lead cable (flat)
300/75-ohm adapter
VHF
UHF
(commercially
available)
ANTENNA
ANTENNA
(_ Separate VHF/
_
_'_
300-ohm
UHF antenna
Jl!
able
I
_c_bmine
rcially
_
_
__available)
°It 75-ohm
coaxialcable
/
_
-type connector
should
be
fingertightened
only.
When connecting the RF cable to the TV set, do not tighten
F-type connector with tools.
If tools are used, it may cause damage to your TV set. (The
breaking of internal circuit, etc.)
F-type connector
75-ohm coaxial cable
J
• Connect the antenna cable to the
TV using one of the methods in the
illustration as shown (0, (_, _ or (_).
To TV antenna terminal
Advertisement
