Replacing The Date/Time Battery - Canon EOS 1D MkII Instruction Manual

Table of Contents

Advertisement

Replacing the Date/Time Battery

The date/time (back-up) battery's service life is about 10 years. If the
date/time is reset, replace the back-up battery with a new CR2025
lithium battery as described below.
(+)
Set the <
4
1
and remove the battery pack.
¡The back-up battery is on the ceiling of
the battery compartment.
Remove the back-up battery
2
cover.
¡As shown in the diagram, loosen the
screw to remove the cover.
Remove the battery.
3
Install a new back-up battery.
4
¡The plus side of the battery must face
up.
Attach the cover.
5
¡Install the battery and turn the <
switch to <
displayed on the LCD monitor. Set the
the date/time.
> switch to <
1
>. The date/time will be
>
2
4
>
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos-1d mark ii digial

Table of Contents