Alarm Lock Trilogy DL1200 Programming Instructions Manual
  1. Manuals
  2. Brands
  3. Alarm Lock Manuals
  4. Locks
  5. Trilogy DL1200
  6. Programming instructions manual

Alarm Lock Trilogy DL1200 Programming Instructions Manual

Hide thumbs Also See for Trilogy DL1200:
Table of Contents

Advertisement

Quick Links

345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
© ALARM LOCK 2005
CONGRATULATIONS!
Your new DL1200 Alarm Lock Trilogy electronic digital lock is a manually
programmable narrow stile entry trim for Adams Rite
4900 deadlatch locks, and 1850, 1950, 4070, MS1850S and MS1950S
series deadbolts for narrow stile aluminum doors*. The DL1200 is a rug-
ged entry lock of advanced design with several programmable features.
Three security levels are provided: Master (can perform ALL functions),
Manager (can perform MOST functions plus entry), and Basic User
(entry only).
The lock includes 100 User Codes (consisting of Managers and Basic
Users), plus three "one-time entry" Service Codes.
The Manager/Basic User Codes are organized
similar to a grid--ten banks of ten Access Codes.
Take the time to read through this guide to familiar-
ize yourself with the features and operations of the
lock, and its quick and easy programming proce-
dures.
Features
1 Master Code (all functions including entry)
•
10 Manager Codes (perform SOME programming
•
functions plus entry)
90 Basic User Access Codes (Entry Only)
•
3 Service Codes ("One-Time Entry" Codes)
•
Two User Disable Modes:
•
All User Codes Disabled Except Master Code
•
All User Codes in a Bank Disabled Except
•
Manager Codes
30-Second Keypad Anti-Tamper Lockout:
•
(Keypad Lockout After 3 Unsuccessful User Code
Entries)
*Adams Rite Manufacturing Co., Pomona, CA. www.adamsrite.com
All products, product names and services described in this manual are for identification
purposes only and may be trademarks of their respective companies.
Trilogy
Programming Instructions
DL1200
®
4710, 4730 and
QUICK LOOKUP
Wiring .................................................................2
Quick Start ........................................................2
Testing Codes ....................................................3
Change Existing Master Code .......................7
Add/Change Manager Codes ........................7
Add/Change User Codes ..............................7
Deleting Codes ..............................................7
Disable/Enable Users ....................................7
Disable/Enable All .........................................8
Code Location Function ................................8
Next Free Code Address Locator ..................8
Add/Delete Service Codes ...........................9
Enable/Disable Passage Mode .....................9
Disable/Enable Groups .................................9
Disable/Enable Users in Bank .....................10
Keypress Sound Options .............................10
Audible and LED Indications ............................10
Battery Replacement ........................................11
Erase All Programming ....................................11
Limited Warranty ..............................................12
OI310 11/05
DL1200
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Trilogy DL1200 and is the answer not in the manual?

Questions and answers

Related Manuals for Alarm Lock Trilogy DL1200

Summary of Contents for Alarm Lock Trilogy DL1200

  • Page 1: Table Of Contents

    For Technical Service 1-800-645-9440 © ALARM LOCK 2005 OI310 11/05 CONGRATULATIONS! Your new DL1200 Alarm Lock Trilogy electronic digital lock is a manually ® programmable narrow stile entry trim for Adams Rite 4710, 4730 and 4900 deadlatch locks, and 1850, 1950, 4070, MS1850S and MS1950S series deadbolts for narrow stile aluminum doors*.

  • Page 2: Wiring

    Wiring Wiring: See the Installation Instructions for more information. Batteries: Use only two '123' Type Lithium batteries (Duracell P/N CR17345). Quick Start First Time Start Up 1. Unpack the lock from its factory packaging. 2. Connect the battery pack. 3. Listen for 3 beeps. The lock is now ready to accept programming. Note: Failure to follow this exact proce- dure can result in erratic lock behavior.

  • Page 3: Testing Codes

    Quick Start (cont’d) Enter a Manager Code Manager Codes are located at locations 00, 10, 20, 30, 40, 50, 60, 70, 80, and 90 (see grid on page 4). Note: New Manager Codes MUST use the same number of digits as the (new) Master Code. Enter as follows. 1.

  • Page 4: Manager & User Location Worksheet

    Manager & User Location Worksheet The DL1200 lock provides three "security levels": Master (can perform ALL functions), Manager (can perform SOME program- ming functions plus entry), and Basic User (entry only). In total, there are 104 "locations" inside the DL1200 lock: one Master Code, 10 Manager and 90 User Access Codes, and three "one-time entry"...

  • Page 5: Manager & User Location Example

    Manager & User Location Example User Access Codes allow access only; Manager Codes allow more: Manager Codes have the ability to program and delete User Access Codes within that Manager's Bank (column). The DL1200 lock can hold up to 10 Manager Codes, one for each Bank (locations (00), (10), (20), (30), (40), (50), (60), (70), (80), (90)), and are all found at the top row of the grid be- low.

  • Page 6: Programming Worksheet: Functions

    Programming Worksheet: Functions Directions: The Factory Master Code (1-2-3-4-5) must first be reprogrammed as a new Master Code before any other programming can take place. All new Access Codes must have the same number of digits as the new Master Code. Choose new Access Codes and write them in spaces provided (in pencil) before programming the lock.

  • Page 7: Change Existing Master Code

    Programming Functions Change Existing Master Code* ; 1 ; For new locks, follow the "Quick Start" on page 2. __ __ __ __ __ ; 1 ; __ __ __ __ __ __ __ __ __ __ Old (or "Factory") Master Code New Master Code* Confirm New Master Code* Add/Change Manager Codes...

  • Page 8: Disable/Enable All

    Programming Functions (cont'd) Enable/Disable All Disable All: If Master Code is used, disables all 100 User\Manager Codes and clears all 3 Service Codes. If a Manager Code is used, disables all Users (even across multiple Banks) under that Manager. Disable Users Only: If Master Code is used, disables all 90 Users and clears all 3 Service Codes, while Manag- ers remain active.

  • Page 9: Add/Delete Service Codes

    Programming Functions (cont'd) Add/Delete Service Codes Service Codes are one-time-only Codes; once entered into the keypad, it is deleted. Use the same Code up to 3 times by programming all three Service Codes with the same Code. Note: Service Codes are lost if power is removed.

  • Page 10: Disable/Enable Users In Bank

    Programming Functions (cont'd) Disable/Enable Users in Bank Enter Bank number (0-9) to Enable/Disable all Users in Bank. Entering a disabled Code will result in an accented five beep error tone (indicating the User Access Code is valid but disabled). Disable Users in Bank __ __ __ __ __ ;...

  • Page 11: Battery Replacement

    Battery Replacement When the batteries are weak and a key is pressed, the lock will alert you by flashing the RED LED accompanied by a high/low sounder. The DL1200 uses two '123' Type Lithium batteries (Duracell P/N CR17345). The lock will function with weak batteries;...

  • Page 12: Limited Warranty

    ALARM LOCK will, In no event shall ALARM LOCK be liable for an within said period, at its option, repair or replace any amount in excess of ALARM LOCK's original selling...

Table of Contents

Save PDF