Water Supply Connection; Connecting The Water Supply - Electrolux E15IM60E Use & Care Manual

CONNECTING THE WATER SUPPLY

When connecting the water supply, follow these guidelines:
• Review the local plumbing codes before you install the unit.
• The water pressure should be between 20 and 120 psi.
CA CA UTION UTION
CA CAUTION CA UTION UTION
!
If you are using a filter system you will need to have at least 20 psi for 3 minutes every
15 minutes.
• Make certain a SHUT-OFF VALVE is
installed in the 1/4 inch water supply line.
• Connect sufficient tubing to the unit to allow
the unit to be moved for cleaning and
servicing. However, make certain that the
tubing is not pinched or damaged during
installation.
• Electrolux recommends the use of copper
tubing for installation.

Water Supply Connection

13
WATER
CONNECTION
UL103_CO
Figure 7