Recording Setup - Panasonic AG-HMR10 Operating Instructions Manual

Setup menu list (continued)

RECORDING SETUP

The content selected under [RECORDING SETUP] is set for each mode individually.
Item
REC FORMAT SDI/CAM
PREREC CAM
MODE
AUTO REC SDI
TIME STAMP SDI/CAM
MIC ALC SDI/CAM
INT SG SDI/CAM
84
Display
mode
Selects the recording format.
When [SYSTEM FREQ]
is set to [59.9Hz]
PH 1080/60i
PH 1080/30P ∗
PH 1080/24P ∗
PH 720/60P
PH 720/30P ∗
PH 720/24P ∗
HA 1080/60i
HG 1080/60i
HE 1080/60i
∗ Only available in CAM mode.
•
PH 1080/24P and PH 720/24P represent native recording.
Selects whether to use the PRE REC function. (Page 49)
ON OFF
•
When [ON] is selected, [TCG] in the [TC/UB SETUP] setup menu is set to
[FREE RUN].
Selects whether to record and stop automatically in accordance with the signal
input from a camera-recorder that is connected to the HD-SDI terminal.
OFF:
TYPE1:
TYPE2:
TYPE3:
•
For details on whether to select TYPE1 or TYPE2, see "Recording formats and
recording marks of Panasonic camera-recorders". (Page 85)
•
See the following web site for devices that have confirmed compatibility with TYPE3.
http://panasonic.biz/sav/autorec_e
•
The input and recording may not be synchronized at such times as when the
recording/stop interval is too short (1 second or less) or when the input signals
are disturbed.
•
When a setting other than [OFF] is selected, the recorder's power must be
turned on, and the camera recorder must be connected in the recording
standby mode.
Sets whether date and time information is superimposed over recorded images.
ON: Superimposes the information that is set in [DATE/TIME].
OFF: Does not superimpose the information that is set in [DATE/TIME].
Selects whether to automatically control the microphone level which is input from
the microphone.
ON OFF
Set to [ON] to reduce audio distortion at high input levels.
To adjust the recording level of audio signals (not related to the settings of this item),
press the [AUDIO MON/ADV] button while pressing the [SHIFT/EXEC] button.
Switches the recording signal to the internal signal.
ON: Internal color bar
OFF: External input signal
Description of settings
Does not record or stop automatically.
Records and stops automatically in accordance with the recording
mark in the LTC information that is added to HD-SDI.
Records and stops automatically in accordance with the recording
mark in the S-VITC information that is added to HD-SDI.
Sets when using a camera-recorder that is not manufactured by
Panasonic.
When [SYSTEM FREQ]
is set to [50Hz]
PH 1080/50i
PH 1080/25P ∗
PH 720/50P
PH 720/25P ∗
HA 1080/50i
HG 1080/50i
HE 1080/50i
indicates the factory default setting.