Appendix A : Roomba 500 Series Built-In-Test Procedure - iRobot Roomba 570 Service Manual

Appendix A : Roomba 500 Series Built-in-Test Procedure

Start with Roomba powered OFF by pressing the CLEAN button for a few seconds.
To enter :
Auto-advance Built-in-Test
Manual-advance Built-in-Test
Auto-advance Mobility Test
Manual-advance Mobility Test
Display + beep software date code
Enter voice tutorial
Power OFF and reboot Roomba
(will erase schedule too)
Put Roomba into Built-in-Test mode (BIT):
Perform these Key Sequences:
Hold CLEAN and DOCK and pulse SPOT 3 times.
Release buttons
Hold CLEAN and DOCK and pulse SPOT 6 times.
Release buttons
Hold CLEAN and DOCK and pulse SPOT 9 times.
Release buttons
Hold CLEAN and DOCK and pulse SPOT 12 times.
Release buttons
Hold CLEAN and SPOT and pulse DOCK 6 times.
Release buttons
Turn robot on by pressing CLEAN. Hold DOCK for 3
seconds
Hold SPOT and DOCK at least 10 seconds (15 is safe)
42