At The Printer: Login Service Not Available; At The Printer: User Unknown; At The Printer: Login Denied; At The Printer: Restricted Access - Samsung CLX-9250ND Administrator's Manual

5 Troubleshooting
5.7

At the printer: Login service not available

This message is displayed when communication is lost between the device and
the SafeCom server. Check the following:

If you experience problems after consecutive loads of the SafeCom Go
Samsung software to a Samsung device then power cycle the Samsung
device.

Does the Configuration web page (2.7.2) reference a SafeCom server and
is the IP address and Group name correct?

Is the SafeCom Service running on the SafeCom server?

Is the network down?

Is there a firewall blocking the communication?

Is the device connected to the network?
The message is cleared and the device returns to normal operation by itself a
couple of minutes after communication is restored.
5.8

At the printer: User unknown

The used card (or entered user code) is unknown. Make sure the card is
registered (0).
5.9

At the printer: Login denied


Wrong PIN code.

The device is not registered.

Too many consecutive failed login attempts has caused Prevent login to
be checked on the Identification tab in the User properties dialog.
If none of the above accounts for the message it could be because the Windows
system on the SafeCom server does not allow any more connections. If you also
get the message "Connection error. Login failed" when you try to login to
SafeCom Administrator, then you should restart the computer.

5.10 At the printer: Restricted access


The user is not allowed to use the device.

A Pay user is trying to login and Pay is not selected on the License tab in
the Device properties dialog.

5.11 At the printer: Error printing document


Pull Print is cleared on the License tab in the Device properties dialog.

Pull Print is cleared on the Settings tab in the Device properties dialog.
D60719-07 43