Install Card Reader; Safecom Go Samsung Web; Web Pages; Open Safecom Settings In A Web Browser - Samsung CLX-9250ND Administrator's Manual

2 SafeCom Go Samsung
2.5

Install card reader

For users to login by card, a card reader needs to be installed on the device.
Connect the SafeCom ID Device directly to the external USB. The USB port is
located at the rear of the device next to the network port.
Note: If there are multiple USB ports use the one marked XOA.
Note: Please contact your Samsung representative to obtain the required
Samsung firmware patch as referenced in the SafeCom Go Samsung release
note.
2.6 SafeCom Go Samsung web pages
The SafeCom Go Samsung Web Interface adheres to the structure and design of
the Samsung Embedded Web Server.
Through the Samsung web interface, users can manage the following SafeCom
settings for each device.

Configuration (2.6.2): Configure the SafeCom server and the Samsung
device. Specify the default e-mail addresses and setup the encryption.

Information (2.6.3): View the product, system, and user information. E-
mail SafeCom Support.

Register (2.6.4): Register the device with user logon and pin code.

Log (2.6.5): Manage the log settings.
2.6.1

Open SafeCom Settings in a web browser

1. Open a web browser and enter the address of the device in the address
field.
Note: Use of JavaScript (Active Scripting) must be enabled.
2. Click Login in the top menu.
3. Enter ID (default is admin) and Password, and click Login.
a)
b)
D60719-07
On Samsung A3 models, click XOA in the top menu and
then SafeCom.
On Samsung A4 models, first click the
Network/Security/Maintenance button,
then XOA and then select SafeCom.
16