Status; Date And Time - Panasonic PT-DW530E Operating Instructions Manual

PROJECTOR SETUP menu

STATUS

Displays the status of the projector.
1 ) Press ▲▼ to select [STATUS].
2 ) Press <ENTER> button.
3 ) Press ◄► to move to the next page.
INPUT
SIGNAL NAME
SIGNAL
FREQUENCY
PROJECTOR
RUNTIME
LAMP
INTAKE
AIR TEMP.
OPTICS
MODULE TEMP.
AROUND
LAMP TEMP.
NUMBER OF
ENTRY SIGNAL
REMOTE

STATUS

PROJECTOR
TYPE
SERIAL
NUMBER
LAMP UNIT
MODEL NO.
LAMP SERIAL
NUMBER
MAIN VERSION
SUB VERSION
NETWORK
VERSION
EMULATE
68
- ENGLISH
Displays the input selection
state.
Displays the input signal name.
Displays the frequency of the
input signal.
Displays the projector runtime.
ECO:
z
LAMP POWER: Shows the
lamp lighting time in ECO
mode.
NORMAL:
z
LAMP POWER: Shows the
lamp lighting time in NORMAL
operation.
TOTAL:
z
Shows the total lamp lighting
time.
Displays the intake air
temperature of the projector.
Displays the temperature inside
the projector.
Displays the temperature around
the lamp of the projector.
Displays the number of
registered signals.
Displays [REMOTE] control
status.
Displays type of projector.
Displays the serial number of the
projector.
Displays the component number
of the lamp unit.
Displays the serial number for
lamp.
Displays the main version of the
firmware of the projector unit.
Displays the sub version of the
firmware of the projector unit.
Displays the network version of
the projector unit.
Displays the set emulate mode.
POWER ON TIMES :
z
Displays the number of times
the power has been turned
ON COUNT on.
LAMP ON :
z
Displays the number of times
LAMP has been lit.
*1 :
Lamp replacement time =
LAMP POWER [NORMAL] lighting time
+ (LAMP POWER [ECO] lighting time x 2 ÷ 3)

DATE AND TIME

This lets you set the time zone and the current date
and time for the projector's internal clock.
Setting the TIME ZONE
J
1 ) Press ▲▼ to select [DATE AND TIME].
2 ) Press <ENTER> button.
3 ) Press ▲▼ to select [TIME ZONE].
4 ) Press ◄► to switch [TIME ZONE].
Adjusting the date and time
J
manually
1 ) Press ▲▼ to select [DATE AND TIME].
2 ) Press <ENTER> button.
3 ) Press ▲▼ to select [ADJUST CLOCK].
4 ) Press <ENTER> button.
The [ADJUST CLOCK] screen will be displayed.
z
5 ) Press ▲▼ to select the item to be set,
and press ◄► to set the local time.
6 ) Press ▲▼ to select [APPLY], and
press <ENTER> button.
This completes setting of the time.
z