The following diagram shows a typical 7.1 audio installation:
Connecting the PC to a Home Audio System
You can connect your HP Media Center PC to your
home stereo or home theater multichannel audio
receiver/amplifiers using your existing speakers.
Y adapter cables
Most home receiver/amplifiers have
RCA-type input connectors. You may
need to connect Y adapter cables
between your PC and your receiver/
amplifier. Y adapter cables have one
1/8-inch (3.5 mm) stereo mini-plug on
one end and two RCA connectors on
the other end. These cables are
purchased separately.
For example, see "2.1 home stereo installation" on
page 44, or "6/5.1 home audio installation" on
page 45.
The number of Y adapter cables you need to
connect to your home stereo system depends on the
number of speakers you install:
2/2.1 speaker system: 1 Y adapter cable
■
4/4.1 speaker system: 2 Y adapter cables
■
6/5.1 speaker system: 3 Y adapter cables
■
8/7.1 speaker system: 4 Y adapter cables
■
Connecting a home stereo to a PC typically requires
audio cables that are long enough to connect from
the PC to the stereo. You may also need to purchase
RCA or mini-extension cables.
Y adapter and
extension cables
are purchased
separately.
Configuring Speaker and Sound Options
n
43