Connecting The Tv Signal Source; Connecting The Fm Radio Antenna; Connecting A Digital Video Camera To The Pc - HP Media Center m1100 - Desktop PC Getting Started Manual

n
If a Digital Video
Device Auto Play
window appears
when you connect
your camera, click
Cancel.
18
HP Media Center PC Getting Started Guide

Connecting the TV Signal Source

For information about connecting the TV signal, see
"Connecting the TV Signal Source" on page 24.

Connecting the FM Radio Antenna

(Select models only)
1
Plug the FM radio antenna cable into the
FM In (E) port on the back of the PC. The FM
connector is found on the TV tuner card.
2
You may want to extend the ends of the
cable to improve your FM radio signal
reception.

Connecting a Digital Video Camera to the PC

When connecting an analog camera to the PC, use
the Video and Audio In connectors on the front of
the PC. The following instructions only apply to
digital cameras.
To connect a digital video camera to the PC
1
Turn on the PC, and wait for Windows XP
to start.
2
Connect the video camera transfer cable into
the camera and then into an open port on the
front or back of the PC. Most digital video
cameras use either the FireWire (IEEE 1394)
or the USB port.
E
See the documentation that came with your digital
video camera.
3
A Found New Hardware message appears.
Wait two or three minutes for Windows to
make the necessary settings for the new
device. When installation is complete, a
message appears telling you the camera is
ready to use.