Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AGA Pro
Summary of Contents for AGA Pro
-
Page 1: User Guide
™ Dual Fuel User Guide & Installation & Service Instructions U110054 - 03A... -
Page 2: Table Of Contents
Contents Important Safety Information Installation In Case of Fire Regulations To Prevent Fire or Smoke Damage Installation Safety Instructions Wear Suitable Clothing Converting to Propane Gas Use Only Dry Potholders or Oven Gloves Location of the Range Important Safety Notice and Warning Positioning the Range Proper Installation Moving the Range... -
Page 3: Important Safety Information
1. Important Safety Information Read all instructions before using this appliance. Save Many plastics will burn and most are damaged by heat. Keep these instructions for future reference. plastic items away from parts of the range that may become warm or hot. Do not leave plastic items on the cooktop as Have your appliance properly installed and grounded by they may burn, melt or soften if left too close to a vent or a a qualified technician in accordance with the National... -
Page 4: Wear Suitable Clothing
To avoid risk of electrical shock, personal injury, or death, primarily to the incomplete combustion of natural gas or make sure your range has been properly grounded and liquid petroleum (LP) fuels. Properly adjusted burners will always disconnect it from the main power supply before minimize incomplete combustion. -
Page 5: Use The Right Size Pan
Use the Right Size Pan Placement of Oven Racks Always place oven racks in desired location while This appliance is equipped with burners of different sizes. Use utensils with flat bottoms. Do not use unstable pans and oven is cool. If rack must be moved while oven is hot, do not let potholder contact hot heating element in position the handles away from the edge of the cooktop. - Page 6 Always keep combustible wall coverings or curtains etc. a safe distance away from your range. DO NOT spray aerosols in the vicinity of the range while it is in use. Do not store or use combustible materials, or flammable liquids in the vicinity of this appliance.
-
Page 7: Range Overview
2. Range Overview DocNo.025-0101 - Overview - 90 DF SC - Prof+ FX Fig.2-1 ArtNo.270-0029 - Prof+ 90SC annotated The dual fuel single cavity range cooker (Fig.2-1) has the Fig.2-2 following features: 5 hotplate burners including a wok burner A control panel incorporating a timer A multi-function oven A storage drawer Cooktop Burners... - Page 8 The igniter should spark and light the gas. Keep holding the Fig.2-3 knob pressed in to let the gas through to the burner for about ArtNo.272-0002 ten seconds. Prof+ pyro US - Control to low If, when you let go of the control knob, the burner goes out, then the FSD has not been bypassed.
-
Page 9: Wok Burner
Wok Burner Fig.2-8 The wok burner is designed to provide even heat over a large area. It is ideal for large pans and stir-frying (Fig.2-8). For heating smaller pans, the aforementioned hotplate ArtNo.311-0047 - Elan 110 Wok burner burners may be more efficient. You can remove the burner parts for cleaning;... -
Page 10: Operating The Oven
Operating the Oven Fig.2-10 The multi-function oven has two controls: a function selector and a temperature setting knob (Fig.2-10). ArtNo.272-0003 Prof+ pyro US - MF oven controls (2) Turn the function selector control to a cooking function. Fig.2-11 shows the control set for conventional oven cooking. - Page 11 Rack levels 5 and 6 should be used depending on the size of Fig.2-16 the food being cooked. Fan Assisted Oven This function operates the fans, circulating air heated by the elements at the top and the base of the oven rtNo.030-0028 - Elan MF symbols (Fig.2-17).
-
Page 12: Sabbath Mode
Sabbath Mode Fig.2-21 Choose conventional oven or warming oven modes as best suits you cooking needs. Set the desired temperature with temperature selector. The unit will not shut off until the function selector is turned OFF. Energy Saving Panel Feature ... -
Page 13: The Clock
The Clock Fig.2-24 You can use the 6-button timer (Fig.2-24) to turn the oven on and off. The clock must be set to the time of day before the oven will work. To set the time of day ArtNo.302-0002 - 6BC annotated Press and hold both the [C] and [D] buttons as shown in Fig.2-25. -
Page 14: Key Lock
AUTO is showing, you want to reset to manual Fig.2-34 Fig.2-35 cooking When cancelling an automatic setting, any cooking time already set must be returned to ( 0.00) before you can return to manual, by pressing the [B] button. ArtNo.302-0018 - Deactivating the key lock 2 pyro ArtNo.302-0017 - 6BC Key Lock... -
Page 15: Accessories
Accessories Fig.2-39 Fig.2-40 Oven racks Each range is supplied with the following: ArtNo.326-0013 - Full capacity shelf 2 full width racks (Fig.2-39) (Falcon) 1 telescopic rack with runners (Fig.2-40) 2 broiler pans with grids (Fig.2-41) Fig.2-41 Fig.2-42 3 energy saving racks (Fig.2-42) 2 sets of side rack supports (Fig.2-43) ArtNo.331-0008 - 90SC 1 energy saving divider (Fig.2-44) -
Page 16: Oven Light
Oven Light Fig.2-50 Press the button to turn on the oven lights (Fig.2-50). If one of the oven lights fail, turn off the range circuit breaker before you change the bulb. See the ‘Troubleshooting’ section ArtNo.320-0017 Main oven light for details on how to change an oven light bulb. Storage The bottom drawer is for storing oven trays and other cooking utensils. -
Page 17: Cooking Tips
3. Cooking Tips Cooking with a Multi-function Oven General Oven Tips Remember: not all modes are suitable for all food types. The The wire racks should always be pushed firmly to the back of oven cooking times given are intended for a guide only. the oven. -
Page 18: Cooking Table
4. Cooking Table DocNo.031-0004 - Cooking table - electric & fan single cavity The oven control settings and cooking times given in the table below are intended to be used AS A GUIDE ONLY. Individual tastes may require the temperature to be altered to provide a preferred result. ArtNo.050-0019 - Albertine SC Food is cooked at lower temperature in a fan oven than in a conventional oven. -
Page 19: Troubleshooting
5. Troubleshooting Cooktop ignition or cooktop burners faulty If there is an installation problem and I don’t get my original installer to come back to fix it who pays? Is the power on? You do. Service organizations will charge for their Are the sparker (ignition electrode) or burner holes service if they are correcting work carried out by your blocked by debris? - Page 20 The timed oven is not coming on when automatic cooking Fig.5-1 Has the oven knob been left in the OFF position by mistake? Is the oven locked (see above)? Oven temperature getting hotter as the range gets older ArtNo.324-0005 Oven light bulb If turning the knob down has not worked or only worked for a short time then you may need a new thermostat.
-
Page 21: Cleaning Your Range
6. Cleaning Your Range Essential Information Fig.6-1 Before thorough cleaning, turn off the circuit breaker. Allow the range to cool. After cleaning, remember to switch on the circuit breaker and reset the clock before re-using the range. Never use paint solvents, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt. -
Page 22: Main Top
Main Top Fig.6-5 Lift away pots or pans from the main top. Remove the grates from the spillage area and carefully place in a sink of warm soapy water. Wipe loose debris from the main top. For best results use a liquid detergent cleaner. Rinse with cold water and thoroughly dry with a clean, soft cloth. - Page 23 To remove and refit the telescopic rack and runners Fig.6-10 Slide the rack out on the runners. While holding one of the runners securely, carefully lift the rear of the rack upwards: the rack will spring clear of the central restraining tab. Repeat ArtNo.272-0007 for the opposite side of the rack.
-
Page 24: Cleaning Table
Hot soapy water and soft cloth. Mildly abrasive cleaner with a soft Cleaning Table (Table 6-2) cloth. ArtNo.050-0016 - Cleaning table AGA USA Cleaners listed are available from supermarkets or electrical Outer door Painted enamel Multi-surface cleaner, soft cloth. retailers as stated. For enamelled surfaces use a cleaner that is... - Page 25 WARNING! If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WHAT TO DO IF YOU SMELL GAS Do not try to light any appliance.
-
Page 26: Installation
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. 7. Installation Important! Regulations • Remove all packing material and literature from oven Installation of this range must conform with local codes, or in before connecting gas and electrical supply to range. the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. - Page 27 INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. This will allow the range to be moved for cleaning or Checking the parts: servicing. Also, make sure your floor covering will withstand 3 grates Leveling tool and Allen key 180°F (80°C);...
-
Page 28: Positioning The Range
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Positioning the Range Fig.7-1 Fig.7-1 shows the minimum recommended distances and clearances from the range to nearby surfaces. Min 35½” (90cm) - 36“ (91cm) For Canada, min 363/8” (92.5cm) You MUST provide adequate clearances between the range and adjacent combustible surfaces. -
Page 29: Moving The Range
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Moving the Range Fig.7-3 The range is very heavy. Take great care. We recommend two people maneuver the range. Ensure that the floor covering is firmly attached or removed to prevent it being disturbed when moving the range around. -
Page 30: Completing The Move
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Completing the Move Fig.7-8 Grip under the fascia panel and lift the front of the range ArtNo.010-0009 Pushing the cooker slightly. Carefully position the range close to its final position, leaving just enough space to get behind it (Fig.7-8). -
Page 31: Anti-Tip Device
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Anti-Tip Device Fig.7-10 WARNING! The range MUST be secured by the anti-tip bracket supplied. Unless properly installed, the range could be tipped by leaning on the door and injury might result from spilled hot liquids or from the range itself. -
Page 32: Electrical Connection
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Electrical Connection Fig.7-16 When installed the range must be electrically grounded in accordance with local codes or; in the absence of local codes with the National Electrical Code ANSI/NFPA 70, latest edition. 16”... - Page 33 INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. 4-Wire Conduit Installation Fig.7-18 Disconnect the supplied power cord from the terminal block and ground post. Keep the terminal block parts; you will need them. Remove the strain relief clamp from the power cord and remove the power cord and strain relief clamp from the mounting bracket (Fig.7-18).
- Page 34 INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. 3-Wire Conduit Installation Fig.7-24 Disconnect the supplied power cord from the terminal block and ground post. Keep the terminal block parts; you will need them. Remove the strain relief clamp from the power cord ArtNo.280-0039 Reducer Plate and remove the power cord and strain relief clamp from the mounting bracket.
-
Page 35: Gas Connection
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Gas Connection Fig.7-27 Installation of this range MUST conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1-latest edition. 16”... - Page 36 INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Connect the Range to the Gas Supply Fig.7-30 Shut off the main gas supply valve before disconnecting the Appliance old range and leave it off until the new hookup has been Flexible connector Adaptor gas inlet...
-
Page 37: Seal The Openings
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Seal the Openings Fig.7-31 Seal any openings in the wall behind the range and in the floor under the range when hookups are completed. IMPORTANT: When all connections are completed make sure the flow of combustion and ventilation air to the range is unobstructed. -
Page 38: Range Operational Checks
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Range Operational Checks Moving the Range for Servicing Follow these procedures to remove appliance for servicing: Oven Check Shut off the gas supply and turn off the circuit breaker. Turn on the oven and check that the oven fans start to turn Disconnect gas supply tubing to the appliance and unplug and that the oven starts to heat up. -
Page 39: Conversion To Another Gas Important
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. 8. Conversion to Another Gas Important! Fig.8-1 • Observe all governing codes and ordinances. • The range must be properly grounded. • Save these instructions for the local electrical inspector’s use. -
Page 40: Gas Regulator
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Lift the control panel clear of the tags and pull the control ArtNo.0102-0001 - Unscrewing Fig.8-5 panel forward. the control valve bypass screw Take care not to damage or strain the wiring. Replacing the Bypass Screw ArtNo.0102-0002 - Removing the Unscrew the control valve bypass screw (Fig.8-4). -
Page 41: Stick On Label
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Stick on label Fig.8-10 Stick the “NOW ADJUSTED FOR LP GAS” label next to the ratings label inside the drawer cavity to indicate the gas the appliance is now set for (Fig.8-12). -
Page 42: Refitting The Grille And Drawer
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Refitting the Grille and Drawer Fig.8-14 Refitting the Flue Grille Locate the grille onto the flue and secure to the cooktop with the 4 screws supplied (Fig.8-14). Refitting the Storage Drawer To replace the drawer in the range, pull the side rails fully out (Fig.8-15). -
Page 43: Circuit Diagram
9. Circuit Diagram A2/B1 B2 Code Description Code Description Code Color MF oven master switch Oven protect thermostat Blue MF oven drone switch Oven neon Brown Oven thermostat Oven light Black Oven front switch Oven light switch Orange Right-hand oven base element Door lock neon Right-hand oven top outer element Ignition spark generator... -
Page 44: Technical Data
10. Technical Data INSTALLER: Please leave these instructions with the user. RATING PLATE LOCATION: Inside base drawer of cavity. Remove the drawer (see Overview > Storage for details). COUNTRY OF DESTINATION: USA/Canada Connections ArtNo280-0090 Drawer Cavity & Badges Electric 240 V 60 Hz ½”... - Page 47 AGA warrants the oven heating elements against defects in material or workmanship for an additional two years. These parts will be repaired or replaced at the option of Aga without charge, but you pay for labor and transportation subject to the terms and conditions set out below.
- Page 48 1050 Fountain St. N., Cambridge, Ontario, Canada N3H 4R7 Business (519) 650-5775 or Fax (519) 650-3773 Toll free phone 1-877-650-5775 Toll free fax 1-800-327-5609 www.aga-ranges.com...
Need help?
Do you have a question about the Pro and is the answer not in the manual?
Questions and answers